Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,124Inspections Most recent open 2026-08-25 Last loaded 2026-08-28

OSHA Inspection: C J & B CARPENTRY INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of C J & B CARPENTRY INC. in BUONA BEEF 303 S. WEBER, BOLINGBROOK, IL 60440 (NAICS 238130). OSHA activity number 330971631.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch C J & B Carpentry INC. for free Get an email when a new federal OSHA severe-injury report for C J & B Carpentry INC. is published. One employer, no account, unsubscribe in one click.
Site address
BUONA BEEF 303 S. WEBER
City
BOLINGBROOK
State
IL
ZIP
60440
Mailing
512 ARBOR LANE, OSWEGO, IL 60543
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
2
Ownership type
Private (A)

6 citations on file for this inspection.

1926.20 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 23, 2011
Abate by
Oct 17, 2011
Penalty
Initial $2,400 · Current $2,400
29 CFR 1926.20(b)(1): It shall be the responsibility of the employer to initiate and maintain such programs as may be necessary to comply with this part:    a. On or about July 21, 2011, at the above addressed jobsite, a safety and health program, which would address those hazards associated with the employees' work environment and the company's procedures to eliminate those hazards, had not been developed and maintained.
Recent events (3)
  • · A (S) $2400
  • · I (S) $1200
  • · Z (S) $2400

1926.451 F07

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 23, 2011
Abate by
Oct 17, 2011
Penalty
Initial $0 · Current $0
29 CFR 1926.451(f)(7): Scaffolds shall be erected, moved, dismantled, or altered only under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration. Such activities shall be performed only by experienced and trained employees selected for such work by the competent person:    a. On or about July 21, 2011, at the above addressed jobsite, the ladder jack scaffold had been erected without the supervision of a competent person who would recognize the lack of and need for fall protection.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.454 A

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 23, 2011
Abate by
Oct 17, 2011
Penalty
Initial $0 · Current $0
29 CFR 1926.454(a): The employer shall have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:    a. On or about July 21, 2011, at the above addressed jobsite, employees had not been trained to recognize the hazards involved and the safeguards required to protect themselves while working from a ladder jack scaffold.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.451 E01

Serious Gravity 10 2 instances 2 exposed
Issued
Sep 23, 2011
Abate by
Sep 26, 2011
Penalty
Initial $4,200 · Current $4,200
29 CFR 1926.451(e)(1): When scaffold platforms are more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps,walkways, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar surface shall be used:    a. On or about July 21, 2011, at the above addressed jobsite, employees accessing or egressing the ladder jack scaffold were exposed to falls due to the fact that the work platforms were suspended on the outside of the ladder supports.  The employees had to crawl over the work platform to gain access/egress rather than stepping on or off the ladder.
Recent events (3)
  • · A (S) $4200
  • · I (S) $2100
  • · Z (S) $4200

1926.451 G01 I

Serious Gravity 10 2 instances 2 exposed
Issued
Sep 23, 2011
Abate by
Sep 26, 2011
Penalty
Initial $0 · Current $0
29 CFR 1926.451(g)(1)(i): Each employee on a boatswains' chair, catenary scaffold, float scaffold, needle beam scaffold, or ladder jack scaffold shall be protected by a personal fall arrest system:    a. On or about July 21, 2011, at the above addressed jobsite, employees working from the ladder jack scaffold were exposed to falls of approximately 13 feet due to the lack of personal fall arrest systems.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.452 K05

Serious Gravity 10 1 instance 2 exposed
Issued
Sep 23, 2011
Abate by
Sep 26, 2011
Penalty
Initial $0 · Current $0
29 CFR 1926.452(k)(5):  Ladder jack scaffold platforms  shall not be bridged one to another:    a. On or about July 21, 2011, at the above addressed jobsite, employees were exposed to falls from tripping as the aluminum scaffold platforms were bridged one atop the other in the center of the scaffold.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 330971631.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.