SEBRING, OH —
OSHA Inspection: ALEXANDER MILL SERVICES LLC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of ALEXANDER MILL SERVICES LLC in 20455 LAKE PARK BLVD., SEBRING, OH 44672 (NAICS 562920). OSHA activity number 330974338.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALEXANDER MILL SERVICES LLC
- Site address
- 20455 LAKE PARK BLVD.
- City
- SEBRING
- State
- OH
- ZIP
- 44672
- Mailing
- 897 PERRY HIGHWAY, HARMONY, PA 16037
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 562920
- Employees
- 15
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.23 D01 III
- Issued
- Sep 22, 2011
- Abate by
- Oct 28, 2011
- Penalty
- Initial $1,683 · Current $1,010 Reduced
General-duty citation text
29 CFR 1910.23(d)(1)(iii): On stairways less than 44 inches wide having both sides open, railing was not provided on both sides: The stairway used by employees to reach the recycled water tank had no guardrails on the lower section of the stairway
Recent events (2)
- — I (S) $1010
- — Z (S) $1683
1910.132 A
- Issued
- Sep 22, 2011
- Abate by
- Oct 28, 2011
- Penalty
- Initial $2,805 · Current $1,683 Reduced
General-duty citation text
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered: On or about August 12, 2011, employees working on the open electrical panel to restart the high-speed magnet were not provided with clothing for arc-flash protection.
Recent events (2)
- — I (S) $1683
- — Z (S) $2805
1910.23 C01
- Issued
- Sep 22, 2011
- Abate by
- Oct 7, 2011
- Penalty
- Initial $3,960 · Current $1,980 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings: At the recycled water tank platform there were missing sections of guardrails. Note: Alexander Mill Services at this location, was previously cited for a violation of this occupational safety and health standard, which was contained in OSHA inspection number 314605825, citation number 1, item number 1 and was affirmed as a final order on March 15, 2011.
Recent events (2)
- — I (S) $1980
- — Z (R) $3960
1910.141 C01 I
- Issued
- Sep 22, 2011
- Abate by
- Sep 27, 2011
- Penalty
- Initial $132 · Current $0 Reduced
General-duty citation text
29 CFR 1910.141(c)(1)(i): \r\n\r\n\r\nToilet facilities were not provided in accordance with TABLE J-1 of this Section:\r\n\r\nNo lighting was provided in the portable toilet facilities.\r\n\r\nNote: Alexander Mill Services at this location, was previously cited for a violation of this occupational safety and health standard, which was contained in OSHA inspection number 314605825, citation number 1, item number 2a and was affirmed as a final order on March 15, 2011.\r\n
Recent events (2)
- — I (R) $0
- — Z (R) $132
1910.212 A01
- Issued
- Sep 22, 2011
- Abate by
- Oct 7, 2011
- Penalty
- Initial $3,960 · Current $3,960
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by moving parts: Although a gated enclosure was placed to prevent employee exposure to the idler pinch points at the furnace feed conveyor, employees open this enclosure periodically while the conveyor is running to shovel sand onto the moving belt. Note: Alexander Mill Services at this location, was previously cited for a violation of this occupational safety and health standard, which was contained in OSHA inspection number 314605825), citation number 1, item number 8 and was affirmed as a final order on March 15, 2011.
Recent events (2)
- — I (R) $3960
- — Z (R) $3960
1910.219 D01
- Issued
- Sep 22, 2011
- Abate by
- Oct 7, 2011
- Penalty
- Initial $3,960 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): 1. In the doorway to the pump house there was an unguarded conveyor pulley 510 from the wet side floor level. 2. Although a gated enclosure was placed to prevent employee exposure to pulleys at the furnace feed conveyor, employees open this enclosure periodically while the conveyor is running to shovel sand onto the moving belt. Note: Alexander Mill Services at this location, was previously cited for a violation of this occupational safety and health standard, which was contained in OSHA inspection number 314605825, citation number 1, item number 11 and was affirmed as a final order on March 15, 2011.
Recent events (2)
- — I (R) $0
- — Z (R) $3960
More inspections at Alexander Mill Services LLC
View Alexander Mill Services LLC's full OSHA safety record →
More inspections in this industry (NAICS 562920)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330974338.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.