ASPEN, CO —
OSHA Inspection: LLC BUILDERS INC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of LLC BUILDERS INC in 630 E HYMAN AVE, ASPEN, CO 81611 (NAICS 236220). OSHA activity number 330981291.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LLC BUILDERS INC
- Site address
- 630 E HYMAN AVE
- City
- ASPEN
- State
- CO
- ZIP
- 81611
- Mailing
- 4017 SKY RANCH DRIVE, GLENWOOD SPRINGS, CO 81601
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 4
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.502 B02
- Issued
- Aug 31, 2011
- Abate by
- Sep 12, 2011
- Penalty
- Initial $4,200 · Current $3,000 Reduced
General-duty citation text
29 CFR 1926.502(b)(2): The employer did not install midrails between the top edge of the guardrail system and the walking/working surface when there was no wall or parapet wall at least 21 inches high: (a) Global Work Resources LLC., 630 E. Hyman Ave., Aspen, CO 81611: On and before June 13, 2011 the employer did not install midrails at least 21 inches high on the guardrail systems accessing the elevator shaft. A employee fell approximately 27 feet by reaching his hands and body through the guardrail system where the midrail was measured at 19'' and the toprail measured at 42''. (b) Global Work Resources LLC., 630 E. Hyman Ave., Aspen, CO 81611: On and before June 13, 2011 the employer did not install midrails at least 21 inches high on the guardrail systems around the mezzanine on level 2. It was reported that an employee fell approximately 27 feet by reaching his hands and body through the guardrail system on where the midrail was measured at 19'' and the toprail measured at 42''. Abatement Note: Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $3000
- — Z (S) $4200
1926.501 C
- Issued
- Aug 31, 2011
- Abate by
- Sep 12, 2011
- Penalty
- Initial $1,800 · Current $0 Reduced
General-duty citation text
29 CFR 1926.501(c): The employer did not ensure that toe boards were installed in the guardrail systems to prevent objects from falling from higher levels: \r\n (a) Global Work Resources LLC., 630 E. Hyman Ave., Aspen, CO 81611: On and before June 13, 2011 the employer did not ensure that toe boards were installed in the guardrail system around the mezzanine of level 2 to prevent objects from falling from higher levels onto employees. Employee supplies and materials were found directly under the mezzanine making it possible that employees could be struck-by an object from above. \r\nAbatement Note: Abatement certification and documentation are required for this item (see enclosed \"Certification of Corrective Action Worksheet\").
Recent events (2)
- — I (S) $0
- — Z (S) $1800
1926.503 A01
- Issued
- Aug 31, 2011
- Abate by
- Oct 12, 2011
- Penalty
- Initial $4,200 · Current $2,100 Reduced
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee who might be exposed to fall hazards. There was no program available to allow employees to recognize the hazards of falling and employees were not trained in the procedures to be followed in order to minimize these hazards:\r\n \r\n (a) Global Work Resources LLC., 630 E. Hyman Ave., Aspen, CO 81611: On and before June 13, 2011 the employer did not provide and implement a fall protection training program so that temporary employees could recognize potential fall hazards. The guardrail system was improperly erected exposing employers to fall hazards up to 27 feet.\r\n\r\nAbatement Note: Abatement certification and documentation are required for this item (see enclosed \"Certification of Corrective Action Worksheet\"). \r\n
Recent events (2)
- — I (S) $2100
- — Z (S) $4200
1926.20 B02
- Issued
- Aug 31, 2011
- Abate by
- Sep 10, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.20(b)(2): The employer did not provide a accident prevention program for frequent and regular inspections of the job site to be made by competent persons designated by the employers:\\r\\n\\r\\n (a) Global Work Resources LLC., 630 E. Hyman Ave., Aspen, CO 81611: On and before June 13, 2011 the employer did not ensure that a competent person conducted frequent and regular safety inspections of the project site. The guardrail system used for fall protection did not have the midrail installed at the correct height and was missing a toeboard. This exposed employees to fall and struck-by hazards.\\r\\n\\r\\nAbatement Note: Abatement certification and documentation are required for this item (see enclosed \\\"Certification of Corrective Action Worksheet\\\"). \\r\\n
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.502 B06
- Issued
- Aug 31, 2011
- Abate by
- Sep 10, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.502(b)(6): The employer did not ensure that the guardrail system was surfaced as to prevent injury to an employee from punctures or lacerations, and to prevent snagging of clothing: \\r\\n (a) Global Work Resources LLC., 630 E. Hyman Ave., Aspen, CO 81611: On and before June 13, 2011 the employer did not ensure that the guardrail system on the roof edge was surfaced as to prevent injury to an employee from punctures or lacerations, and to prevent snagging of clothing. The wood used to erect the guardrail system was fractured and large bent nails were extruding from the wood attached to a support post. This condition exposed employees to cuts and laceration hazards. \\r\\nAbatement Note: Abatement certification and documentation are required for this item (see enclosed \\\"Certification of Corrective Action Worksheet\\\"). \\r\\n
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 236220)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330981291.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.