DENVER, CO —
OSHA Inspection: ELITE CONSTRUCTION DESIGN, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ELITE CONSTRUCTION DESIGN, INC. in 3930 UTICA STREET, DENVER, CO 80212 (NAICS 236118). OSHA activity number 330981713.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ELITE CONSTRUCTION DESIGN, INC.
- Site address
- 3930 UTICA STREET
- City
- DENVER
- State
- CO
- ZIP
- 80212
- Mailing
- 2300 W. 2ND AVE., DENVER, CO 80223
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236118
- Employees
- 2
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.404 B01 II
- Issued
- Sep 1, 2011
- Abate by
- Sep 12, 2011
- Penalty
- Initial $1,530 · Current $918 Reduced
General-duty citation text
29 CFR 1926.404(b)(1)(ii): On a construction site, where an assured equipment grounding program was not utilized, all 120-volt, single-phase, 15 and 20 ampere receptacle outlets which were not a part of the permanent wiring of the building or structure and which are in use by employees did not have approved ground fault circuit interrupers for personal protection:\r\n\r\na) Elite Construction Design, Inc. at 3930 Utica Street, Denver, CO 80212: On or before August 27, 2011, the employer did not ensure that the temporary electrical panel included a working GFCI. Condition exposed employees to electrical shock hazards.\r\n\r\nAbatement note: Abatement certification is required for this item (see enclosed, \"Certification of Corrective Action Worksheet\").\r\n
Recent events (2)
- — I (S) $918
- — Z (S) $1530
1926.404 F06
- Issued
- Sep 1, 2011
- Abate by
- Sep 11, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous:\r\n\r\na) Elite Construction Design, Inc. at 3930 Utica Street, Denver, CO 80212: On or before August 27, 2011, the employer did not ensure that two 110 volt extensions cords in use were properly grounded. Condition exposed employees to electrical shock hazards.\r\n\r\nAbatement note: Abatement certification is required for this item (see enclosed, \"Certification of Corrective Action Worksheet\").\r\n
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.405 D
- Issued
- Sep 1, 2011
- Abate by
- Sep 11, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(d): A panelboard was not dead front:a) Elite Construction Design, Inc. at 3930 Utica Street, Denver, CO 80212: On or before August 27, 2011, the employer did not ensure that the temporary electrical panel included a dead front. Condition exposed employees to electrical shock hazards.Abatement note: Abatement certification is required for this item (see enclosed, "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.416 E01
- Issued
- Sep 1, 2011
- Abate by
- Sep 11, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used: a) Elite Construction Design, Inc. at 3930 Utica Street, Denver, CO 80212: On or before August 27, 2011, the employer allowed the use of a worn and frayed 110 volt extension cord. Condition exposed employees to electrical shock hazards.Abatement note: Abatement certification is required for this item (see enclosed, \"Certification of Corrective Action Worksheet\").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.451 E01
- Issued
- Sep 1, 2011
- Abate by
- Sep 16, 2011
- Penalty
- Initial $1,530 · Current $918 Reduced
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, sturcure, personnel hoist, or similar surface was not used. Crossbraces were used as a means of access:a) Elite Construction Design, Inc. at 3930 Utica Street, Denver, CO 80212: On or before August 27, 2011, the controlling employer did not ensure that a safe means of access was provided for the masonary fabricated frame saffold.Condition exposed employees to fall hazars of up to 11'. Abatement note: Abatement certification is required for this item (see enclosed, "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $918
- — Z (S) $1530
More inspections at Elite Construction Design, INC.
View Elite Construction Design, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 236118)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330981713.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.