DENVER, CO ·
OSHA Inspection: ARMENDARIZ, OMAR
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ARMENDARIZ, OMAR in 3930 UTICA STREET, DENVER, CO 80212 (NAICS 238140). OSHA activity number 330982067.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ARMENDARIZ, OMAR
- Site address
- 3930 UTICA STREET
- City
- DENVER
- State
- CO
- ZIP
- 80212
- Mailing
- 9350 ROSE COURT, THORNTON, CO 80229
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 2
- Ownership type
- Private (A)
Citations
7 citations on file for this inspection.
1926.451 C02 II
- Issued
- Sep 1, 2011
- Abate by
- Sep 11, 2011
- Penalty
- Initial $1,530 · Current $1,530
General-duty citation text
29 CFR 1926.451(c)(2)(ii): Unstable objects were used to support scaffolds or platform units:a) Armendariz, Omar at 3930 Utica Street, Denver, CO 80212: On or before August 27, 2011, the employer allowed the use of triangular outrigger bracing that was connected only at the top point. Condition exposed employees to fall hazards of up to 11\'. Abatement note: Abatement certification is required for this item (see enclosed, "Certification of Corrective Action Worksheet\").
Recent events (1)
- · Z (S) $1530
1926.451 C02 III
- Issued
- Sep 1, 2011
- Abate by
- Sep 11, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(c)(2)(ii): Unstable objects were used as working platforms: a) Armendariz, Omar at 3930 Utica Street, Denver, CO 80212: On or before August 27, 2011, the employer provided an unstable plank for use as a scaffold working platform. Condition exposed employees to fall hazards of up to 11\'. Abatement note: Abatement certification is required for this item (see enclosed, \"Certification of Corrective Action Worksheet\").
Recent events (1)
- · Z (S) $0
1926.451 E01
- Issued
- Sep 1, 2011
- Abate by
- Sep 11, 2011
- Penalty
- Initial $1,530 · Current $1,530
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, sturcure, personnel hoist, or similar surface were not used: a) Armendariz, Omar at 3930 Utica Street, Denver, CO 80212: On or before August 27, 2011, the controlling employer did not ensure that a safe means of access was provided for the masonary fabricated frame saffold. Condition exposed employees to fall hazars of up to 11\'. Abatement note: Abatement certification is required for this item (see enclosed, \"Certification of Corrective Action Worksheet\").
Recent events (1)
- · Z (S) $1530
1926.404 B01 II
- Issued
- Sep 1, 2011
- Abate by
- Sep 11, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(b)(1)(ii): On a construction site, where an assured equipment grounding program was not utilized, all 120-volt, single-phase, 15 and 20 ampere receptacle outlets which were not a part of the permanent wiring of the building or structure and which are in use by employees did not have approved ground fault circuit interrupers for personal protection: a) Armendariz, Omar at 3930 Utica Street, Denver, CO 80212: On or before August 27, 2011, the employer did not ensure that the temporary electrical panel included a working GFCI. Condition exposed employees to electrical shock hazards. Abatement note: Abatement certification is required for this item (see enclosed, "Certification of Corrective Action Worksheet\").
Recent events (1)
- · Z (O) $0
1926.404 F06
- Issued
- Sep 1, 2011
- Abate by
- Sep 11, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) Armendariz, Omar at 3930 Utica Street, Denver, CO 80212: On or before August 27, 2011, the employer did not ensure that two 110 volt extensions cords in use were properly grounded. Condition exposed employees to electrical shock hazards. Abatement note: Abatement certification is required for this item (see enclosed, "Certification of Corrective Action Worksheet").
Recent events (1)
- · Z (O) $0
1926.405 D
- Issued
- Sep 1, 2011
- Abate by
- Sep 11, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(d): A panelboard was not dead front: a) Armendariz, Omar at 3930 Utica Street, Denver, CO 80212: On or before August 27, 2011, the employer did not ensure that the temporary electrical panel included a dead front. Condition exposed employees to electrical shock hazards. Abatement note: Abatement certification is required for this item (see enclosed, "Certification of Corrective Action Worksheet").
Recent events (1)
- · Z (O) $0
1926.416 E01
- Issued
- Sep 1, 2011
- Abate by
- Sep 11, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used: a) Armendariz, Omar at 3930 Utica Street, Denver, CO 80212: On or before August 27, 2011, the employer allowed the use of a worn and frayed 110 volt extension cord. Condition exposed employees to electrical shock hazards.Abatement note: Abatement certification is required for this item (see enclosed, "Certification of Corrective Action Worksheet").
Recent events (1)
- · Z (O) $0
More inspections in this industry (NAICS 238140)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 330982067.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.