OSHA Inspection: CABBAGE CASES, INC.

Issued

2011-09-15 00:00:00

Abate by

2011-10-15 00:00:00

Penalty

Initial $2975.00 · Current $2083.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1):     Types of guarding. One or more methods of machine guarding shall be provided to protect the operatorand other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips andsparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc.    a. In the Assembly department, the crimping tool was not guarded exposing employees to a point of operation hazard.     b. In the Assembly deparmtment, the rivet machine was not guarded exposing employees to a point of operation hazard.

Issued

2011-09-15 00:00:00

Abate by

2011-09-29 00:00:00

Penalty

Initial $2380.00 · Current $1666.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1):     Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section.          a. In the assembly department, the belt and pulley on the rivet machine was not guarded.

Issued

2011-09-15 00:00:00

Abate by

2011-09-22 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(5)(ii)(D):     Identifiable. Lockout devices and tagout devices shall indicate the identity of the employee applying the device(s).         a. At the workplace, the lockout devices did not indicate the identity of the employee applying the device.