OSHA Inspection: MILLER MANUFACTURING, INC.

Issued

2011-10-13 00:00:00

Abate by

2011-11-12 00:00:00

Penalty

Initial $2975.00 · Current $2083.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(i):     The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.    In the workplace, the employer had not conducted, nor documented an inspection of the lockout/tagout procedures.

Issued

2011-10-13 00:00:00

Abate by

2011-11-12 00:00:00

Penalty

Initial $1785.00 · Current $1250.00 Reduced

General-duty citation text

29 CFR 1910.212(b):     Anchoring fixed machinery. Machines designed for a fixed location shall be securely anchored to preventwalking or moving.      a. In the finishing shop, the Baldor Flap Sander, serial number X0403017189, was not secured to the floor by bolting or other means.

Issued

2011-10-13 00:00:00

Abate by

2011-11-12 00:00:00

Penalty

Initial $1785.00 · Current $1250.00 Reduced

General-duty citation text

29 CFR 1910.213(o)(4):     Lathes used for turning long pieces of wood stock held only between the two centers shall beequipped with long curved guards extending over the tops of the lathes in order to prevent the work pieces from being thrown out of the machines ifthey should become loose.    In the finishing shop, the Hapfo wood lathe did not have a guard thereby exposing employees to a struck by hazard.