MANCHESTER, NH —
OSHA Inspection: MAPLE MECHANICAL SVCS., INC.
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of MAPLE MECHANICAL SVCS., INC. in 100 BRADLEY ST., MANCHESTER, NH 03103 (NAICS 238220). OSHA activity number 331064808.
Where did this inspection happen?
- Establishment
- MAPLE MECHANICAL SVCS., INC.
- Site address
- 100 BRADLEY ST.
- City
- MANCHESTER
- State
- NH
- ZIP
- 03103
- Mailing
- 75 TADMUCK RD., WESTFORD, MA 01886
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238220
- Employees
- 5
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.102 A01
- Issued
- Abate by
- Penalty
- Initial $1980.00 · Current $990.00 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. Bldg. D: 1) The employee, cutting wood and PVC pipe with the reciprocating saw, was not wearing eye protection. 2) The employee, cutting studs with the circular saw, was not wearing eye protection
Recent events (2)
- — I (S) $990
- — Z (S) $1980
1926.405 G02 IV
- Issued
- Abate by
- Penalty
- Initial $2640.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: Bldg. D, 3rd floor: The strain relief on the Black & Decker circular saw, used by an employee to cut wood studs, was separated from the power cord.
Recent events (2)
- — I (O) $0
- — Z (S) $2640
1926.416 E01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used: Bldg. D, 3rd floor: The power cord cover on the Black & Decker circular saw, used by an employee to cut wood studs, was torn from the strain relief connector exposing the electric wires within.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1926.501 B13
- Issued
- Abate by
- Penalty
- Initial $2640.00 · Current $1320.00 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet or more above lower levels was not protected by guardrail systems, safety net systems, or personal fall arrest systems, nor did the employer demonstrate that it is infeasible or creates a greater hazard to use these systems and develop and implement a fall protection plan which meets the requirements of paragraph (k) of section 1926.502. Bldg D: The employees, accessing the upper levels via the stairway at the south end of the building, were exposed to the hazard of falling approximately 6.2 feet from the unguarded door opening at the base of the stairway
Recent events (2)
- — I (S) $1320
- — Z (S) $2640
1926.1051 A
- Issued
- Abate by
- Penalty
- Initial $3960.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1926.1051(a): Stairway(s) or ladder(s) were not provided at all personnel points of access where there was a break in elevation of 19 inches (48 cm) or more, or no ramp, runway, sloped embankment, or personnel hoist was provided: Bldg. D: Stairways or ladders were not provided for employees accessing the building via the 1st floor entrances where the break in elevation was greater than 19-inches. 1) The employees, accessing the building via the center entrance to the first floor, were exposed to a break in elevation of 22-inches. 2) The employees, accessing the building via the north entrance to the first floor, were exposed to a break in elevation of 30-inches. 3) The employees, accessing the building via the south entrance to the first floor, were exposed to a break in elevation of 74-inches.
Recent events (2)
- — I (S) $0
- — Z (S) $3960
1926.150 C01 I
- Issued
- Abate by
- Penalty
- Initial $660.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1926.150(c)(1)(i): A fire extinguisher, rated not less than 2A, was not provided for each 3,000 square feet of the protected building area, or major fraction thereof: Bldg. D: Fire extinguishers were not provided for employees working in the building.
Recent events (2)
- — I (O) $0
- — Z (O) $660
More inspections in this industry (NAICS 238220)
SAN MARCOS, TX—2026-07-16
CASA MECHANICAL SERVICES, LTD.
RIO RANCHO, NM—2026-07-15
PROFESSIONAL STUCCO & SERVICE INC.
BROOKLYN, NY—2026-07-15
DILIGENT AC LLC
PARKVILLE, MD—2026-07-15
AMERICAN AUTOMATIC SPRINKLER COMPANY, INC.
SACRAMENTO, CA—2026-07-15
J.R. PIERCE PLUMBING CO., INC. OF SACRAMENTO
More inspections in NH
PORTSMOUTH, NH—2026-07-15
RODAS CONSTRUCTION CORP
DOVER, NH—2026-07-15
KNOX MARSH DEVELOPMENT LLC
DOVER, NH—2026-07-15
REAL PRO BUILDERS CONSTRUCTION INC
MERRIMACK, NH—2026-07-15
BURGER KING
MILFORD, NH—2026-07-15
R G EXTERIORS, INC.
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331064808.