OSHA Inspection: MOUNT RAINIER NATIONAL PARK LONGMIRE COMPLEX

Issued

Oct 11, 2011

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.107(b)(9):  A clear space of not less than 3 feet on all sides of the spray booth was not kept free from storage or combustible construction:    a)  Sign Shop;  Items including but not limited to paint filters, boxes of papers, wood, and a trash can were stored within 3 feet of the Binks Paint Spray Booth.

Issued

Oct 11, 2011

Abate by

Nov 10, 2011

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.107(e)(2):  Bulk storage of portable containers of flammable or combustible liquids was not in a separate, constructed building detached from other important buildings or cut off in a standard manner.    a)  Sign Shop;  A yellow flammable storage cabinet filled with paint and spray paint was located 4 feet from the paint spray booth in the same room.

Issued

Oct 11, 2011

Abate by

Nov 10, 2011

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:                                                                                                                                 a)  Specific lockout tagout step-by-step procedures were not developed for boilers and air compressors which have stored energy.     The National Park Service was previously cited for a violation of this standard which was contained in OSHA inspection no. 309098275, citation 1,  item 2A, issued on September 22, 2010 with respect to a workplace at Stehekin, WA.     The National Park Service was previously cited for a violation of this standard which was contained in OSHA inspection no. 309096139, citation 1,  item 1A, issued on September 9, 2009 with respect to a workplace at Newhalem, WA.     The National Park Service was previously cited for a violation of this standard which was contained in OSHA inspection no. 309096162, citation 2,  item 3A, issued September 9, 2009 with respect to a workplace at Marblemount, WA.

Issued

Oct 11, 2011

Abate by

Nov 10, 2011

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(c)(6)(ii): The employer did not certify that the periodic inspections of the lockout tagout program had been performed.  The certification did not identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection.    a)  An annual review and certification of lockout tagout procedures were not completed for boilers and air compressors.     The National Park Service was previously cited for a violation of this standard which was contained in OSHA inspection no. 309098275, citation 1,  item 2B, issued on September 22, 2010 with respect to a workplace at Stehekin, WA.     The National Park Service was previously cited for a violation of this standard which was contained in OSHA inspection no. 309096139, citation 1,  item 1B, issued on September 9, 2009 with respect to a workplace at Newhalem, WA.      The National Park Service was previously cited for a violation of this standard which was contained in OSHA inspection no. 309096162, citation 2,  item 3B, issued September 9, 2009 with respect to a workplace at Marblemount, WA.

Issued

Oct 11, 2011

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.212(a)(1):  One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    a)  Carpentry Shop;  The 10" Ryobi table saw did not have a guard over the saw blade.     The National Park Service was previously cited for a violation of this standard which was contained in OSHA inspection no. 309096154 citation 2, item 1, issued on September 9, 2009 with respect to a workplace at Marblemount, WA.

Issued

Oct 11, 2011

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:                                                                                                                        a)  Sign Shop;  The Orbit drill press was not mounted to the floor or securely attached to base which would prevent movement.     The National Park Service was previously cited for a violation of this standard which was contained in OSHA inspection no. 309094332 citation 2, item 1, issued on September 23, 2008 with respect to a workplace at Port Angeles, WA.

Issued

Oct 11, 2011

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.215(b)(9):  The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:    a)  Auto Shop/ Welding Area; The Bitco grinder had it's tongue guard approximately 1 inch from the grinding stone on the right side of the grinder.     The National Park Service was previously cited for a violation of this standard which was contained in OSHA inspection no. 309096162 citation 2, item 7, issued on September 9, 2009 with respect to a workplace at Marblemount, WA    The National Park Service was previously cited for a violation of this standard which was contained in OSHA inspection no. 30904316 citation 2, item 2, issued on October 3, 2008 with respect to a workplace at Port Angeles, WA.    The National Park Service was previously cited for a violation of this standard which was contained in OSHA inspection no. 30904209 citation 2, item 1, issued on August 15, 2008 with respect to a workplace at Port Angeles, WA.

Issued

Oct 11, 2011

Abate by

Nov 10, 2011

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located   and identified so that they were readily accessible without subjecting the employees to injuries:    a)  Auto Shop;  The Buckeye fire extinguisher was blocked from access by a table.

Issued

Oct 11, 2011

Abate by

Nov 10, 2011

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.157(e)(2):  Portable fire extinguishers were not visually inspected at least monthly:    a)  Longmire Complex; Fire extinguishers including but not limited to the Buckeye fire extinguisher in the Electrical Shop, the Amerex Fire Extinguisher in the Carpentry Shop, and the Buckeye fire extinguisher in the Auto Shop had not undergone monthly visual inspections.

Issued

Oct 11, 2011

Abate by

Nov 10, 2011

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.157(e)(3):  Portable fire extinguishers were not subjected to an annual maintenance check:    a)  Longmire Complex; Fire extinguishers including but not limited to the Buckeye fire extinguisher in the Electrical Shop, the Amerex Fire Extinguisher in the Carpentry Shop, and the Buckeye fire extinguisher in the Auto Shop had not undergone annual maintenance checks since October 2008.

Issued

Oct 11, 2011

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.303(g)(1)(ii):  Working space about electric equipment rated 600 volts, nominal, or less was used for storage:    a)  Carpentry Shop;  A planer, wood table, wooden bench and saws were stored directly in front of the breaker panel.     b)  Paint Storage Shop;  Stacks of wood, a stereo, rake, axes and a chair were stored underneath the breaker panel.