PLAINFIELD, IL ·
OSHA Inspection: SUPERIOR STRUCTURES CONSTRUCTION LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SUPERIOR STRUCTURES CONSTRUCTION LLC in JEFF'S SMALL ENGINE REPAIR 12438 S. ROUTE 59, PLAINFIELD, IL 60544 (NAICS 238170). OSHA activity number 331068932.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SUPERIOR STRUCTURES CONSTRUCTION LLC
- Site address
- JEFF'S SMALL ENGINE REPAIR 12438 S. ROUTE 59
- City
- PLAINFIELD
- State
- IL
- ZIP
- 60544
- Mailing
- 155 KIRKLAND CIRCLE SUITE 400, OSWEGO, IL 60543
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 5
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.20 B01
- Issued
- Dec 8, 2011
- Abate by
- Dec 30, 2011
- Penalty
- Initial $1,800 · Current $1,800
General-duty citation text
29 CFR 1926.20(b)(1): It shall be the responsibility of the employer to initiate and maintain such programs as may be necessary to comply with this part: a. On or about September 15, 2011, at the above addressed jobsite, a safety and health program, which would address those hazards associated with the employees work environment and the company's procedures to eliminate those hazards had not been developed and maintained.
Recent events (1)
- · Z (S) $1800
1926.20 B02
- Issued
- Dec 8, 2011
- Abate by
- Dec 30, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.20(b)(2): Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers: a. On or about September 15, 2011, at the above addressed jobsite, safety inspections had not been conducted by persons capable of identifying and correcting hazards to assure employee safety.
Recent events (1)
- · Z (S) $0
1926.503 A01
- Issued
- Dec 8, 2011
- Abate by
- Dec 30, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards: a. On or about September 15, 2011, at the above addressed jobsite, an employee training program addressing fall hazards and the company's procedures to be followed to protect the employees from exposure to those hazards had not been developed and maintained.
Recent events (1)
- · Z (S) $0
1926.501 B04 I
- Issued
- Dec 8, 2011
- Abate by
- Dec 9, 2011
- Penalty
- Initial $4,200 · Current $4,200
General-duty citation text
29 CFR 1926.501(b)(4)(i): Each employee on walking/working surfaces shall be protected from falling through holes(including skylights) more than 6 feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes: a. On or about September 15, 2011, at the above addressed jobsite, employees were exposed to falls of approximately 15 feet through an unprotected roof opening while working on the roof.
Recent events (1)
- · Z (S) $4200
1926.501 B11
- Issued
- Dec 8, 2011
- Abate by
- Dec 9, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.501(b)(11): Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems: On or about September 15, 2011, at the above addressed jobsite, employees were exposed to falls of approximately 12 feet while working atop the 12/12 pitched roof with only slide guards installed for fall protection.
Recent events (1)
- · Z (S) $0
1926.1053 B01
- Issued
- Dec 8, 2011
- Abate by
- Dec 9, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1053(b)(1): When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support: a. On or about September 15, 2011, at the above addressed jobsite employees accessing and egressing the roof were exposed to falls of approximately 15 feet when getting on or off the extension ladder which did not extend 3 feet above the roof level.
Recent events (1)
- · Z (S) $0
More inspections in this industry (NAICS 238170)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331068932.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.