MOUNT VERNON, OH —
OSHA Inspection: PACS INDUSTRIES INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of PACS INDUSTRIES INC. in 8405 BLACKJACK ROAD, MOUNT VERNON, OH 43050 (NAICS 335313). OSHA activity number 331073130.
Where did this inspection happen?
- Establishment
- PACS INDUSTRIES INC.
- Site address
- 8405 BLACKJACK ROAD
- City
- MOUNT VERNON
- State
- OH
- ZIP
- 43050
- Mailing
- 8405 BLACKJACK ROAD, MOUNT VERNON, OH 43050
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 335313
- Employees
- 160
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Abate by
- Penalty
- Initial $4208.00 · Current $3787.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices, electronic safety devices, etc. a) In the Weld Shop, a Craftsman 20'' Drill Press had a rotating chuck that was inadequately guarded.
Recent events (2)
- — I (S) $3786.75
- — Z (S) $4207.5
1910.212 A03 II
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle: a) In the Weld Room, on or about 10/04/11, the employer did not ensure a Craftsman drill press used by employees had its cutting bit's point of operation effectively guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 B
- Issued
- Abate by
- Penalty
- Initial $3366.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.212(b): Anchoring fixed machinery. Machines designed for a fixed location shall be securely anchored to preventwalking or moving. a) In the Weld Room, a Craftsman 20 inch drill press, used by employees, was intended for fixed structure mounting but was not secured to prevent walking or moving.
Recent events (2)
- — I (S) $0
- — Z (S) $3366
1910.132 D01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards were present, or were likely to be present, which necessitated the use of personal protective equipment: a) In the Weld Room, on or about 10/04/11, the employer had not performed a hazard assessment of the workplace. The company relocated to this facility approximately 6 months ago and has not yet conducted an assessment to determine if hazards were present which would necessitate the use of personal protective equipment
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 335313)
POLK, PA—2026-06-25 00:00:00
VOYTEN ELECTRIC AND ELECTRONICS, INC.
REMLAP, AL—2026-05-28 00:00:00
SOUTHEASTERN MANUFACTURING INC
BEAVER, PA—2026-03-04 00:00:00
EATON CORPORATION
BEAVER, PA—2026-03-04 00:00:00
EATON CORPORATION
COVERT, MI—2026-02-09 00:00:00
SIEMENS ENERGY, INC.
More inspections in OH
WELLINGTON, OH—2026-07-16 00:00:00
WHIRLAWAY CORPORATION
WAUSEON, OH—2026-07-16 00:00:00
WATSON WELL DRILLING INC.
SEVEN HILLS, OH—2026-07-15 00:00:00
STONEY ACRES BUILDERS LLC
SEVEN HILLS, OH—2026-07-15 00:00:00
GRB ENTERPRISES LLC
CHILLICOTHE, OH—2026-07-15 00:00:00
KENWORTH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331073130.