OSHA Inspection: ACCURATE FAB

Issued

Nov 16, 2011

Abate by

Nov 30, 2011

Penalty

Initial $1,800 · Current $1,000 Reduced

General-duty citation text

29 CFR 1910.303(f):     Each service, feeder and branch circuit, at its disconnecting means or over current device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:    By the exit door, the panel box containing the disconnects for the lights, transformers and other equipment, was not labeled.

Issued

Nov 16, 2011

Abate by

Nov 19, 2011

Penalty

Initial $1,800 · Current $1,000 Reduced

General-duty citation text

29 CFR 1910.303(g)(1):     Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:    The 480V panel box by the exit door, was blocked by wood.

Issued

Nov 16, 2011

Abate by

Nov 30, 2011

Penalty

Initial $14,000 · Current $7,000 Reduced

General-duty citation text

29 CFR 1910.212(a)(3)(ii):     Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):    The Trauma Bend C120 press brake, operated by foot, did not have any point of operation guarding.

Issued

Nov 16, 2011

Abate by

Nov 23, 2011

Penalty

Initial $7,200 · Current $3,000 Reduced

General-duty citation text

29 CFR 1910.147(a)(2)(ii):     Lockout/tagout procedures are to be implemented when servicing and/or maintenance is taking place during normal production operations if an employee is required to (A) Remove or bypass a guard or other safety device; (B) is required to place any part of his or her body into area on a machine or piece of equipment where work is actually performed upon the material being processed (point of operation) or where an associated danger zone exists during a machine operating cycle:    On or before10/13/11, employees who are required to do set-up /maintenance on the hydraulic press brake, did not lockout the hydraulic press brake.    NOTE:  ACCURATE FAB WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 1910.147(c)(1), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 314382276, CITATION NUMBER 1, ITEM NUMBER 3, AND WAS AFFIRMED AS A FINAL ORDER ON 5/10/10, WITH RESPECT TO A WORKPLACE AT 1430 MILLER PARKWAY, STREETSBORO, OHIO.

Issued

Nov 16, 2011

Abate by

Nov 30, 2011

Penalty

Initial $7,200 · Current $3,000 Reduced

General-duty citation text

29 CFR 1910.147(c)(7)(i)(A):     Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control:    Authorized employees did not receive training in the recognition of hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control.  Equipment includes, but is not limited to, hydraulic press brakes,  etc.    NOTE:  ACCURATE FAB WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 1910.147(c)(1), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 314382276, CITATION NUMBER 1, ITEM NUMBER 3, AND WAS AFFIRMED AS A FINAL ORDER ON 5/10/10, WITH RESPECT TO A WORKPLACE AT 1430 MILLER PARKWAY, STREETSBORO, OHIO.

Issued

Nov 16, 2011

Abate by

Nov 30, 2011

Penalty

Initial $7,200 · Current $3,000 Reduced

General-duty citation text

29 CFR 1910.147(d)(4)(i):     Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:    On or before 10/13/11, employees who are requried to do maintenance  and/or servicing on the hydraulic press brake, did not lockout the machine prior to doing any maintenance and/or servicing.    NOTE:  ACCURATE FAB WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 1910.147(c)(1), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 314382276, CITATION NUMBER 1, ITEM NUMBER 3, AND WAS AFFIRMED AS A FINAL ORDER ON 5/10/10, WITH RESPECT TO A WORKPLACE AT 1430 MILLER PARKWAY, STREETSBORO, OHIO.