Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: AJM FRAMERS, INC.

Programmed Related inspection · Safety discipline

On , OSHA opened a programmed Related safety inspection of AJM FRAMERS, INC. in 3668 S. DALLAS, AURORA, CO 80014 (NAICS 238130). OSHA activity number 331081745.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch AJM Framers, INC. for free Get an email when a new federal OSHA severe-injury report for AJM Framers, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
AJM FRAMERS, INC.
Site address
3668 S. DALLAS
City
AURORA
State
CO
ZIP
80014
Mailing
3033 S. PARKER ROAD, AURORA, CO 80014
Inspection type
Programmed Related (I)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
1
Ownership type
Private (A)

3 citations on file for this inspection.

1926.451 F03

Deleted Serious Gravity 5 1 instance 4 exposed
Issued
Nov 16, 2011
Abate by
Nov 21, 2011
Penalty
Initial $2,805 · Current $0 Reduced
29 CFR 1926.451(f)(3): Scaffolds and scaffold components were not inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity:    a)  On or about October 25, 2011, AJM Framers, Inc. as a controlling employer, did not ensure that S.G.M. Construction, LLC (subcontractor) protected their employees from injury, in that, pump jack scaffolds in use at the site were not inspected by a competent person prior to use.
Recent events (2)
  • · I (S) $0
  • · Z (S) $2805

1926.451 G04 I

Serious Gravity 5 1 instance 4 exposed
Issued
Nov 16, 2011
Abate by
Nov 21, 2011
Penalty
Initial $6,600 · Current $6,600
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms:    a)  On or about October 25, 2011, AJM Framers, Inc. as a controlling employer, did not ensure that S.G.M. Construction, LLC (subcontractor) protected their employees from fall hazards in excess of 10 feet while working from pump jack scaffolds that did not have guardrails installed around all open ends and sides of the platforms.      AJM Framers, Inc. was previously cited for a violation of this Occupational Safety and Health Standard- 29 CFR 1926.451(g)(4)(i) which was contained in OSHA inspection 312134380 Citation 1, Item 1 issued on August 1, 2008 and became a final order on August 20, 2008 with respect to a worksite located at 6748 S. Versailles Way, Aurora, CO 80014.
Recent events (2)
  • · I (S) $6600
  • · Z (R) $6600

1926.452 J02

Deleted Repeat Gravity 5 1 instance 4 exposed
Issued
Nov 16, 2011
Abate by
Nov 21, 2011
Penalty
Initial $6,600 · Current $0 Reduced
29 CFR 1926.452(j)(2): Poles were not secured to the structure by rigid triangular bracing or equivalent at the bottom, top, and other points as necessary:    a)  On or about October 25, 2011, AJM Framers, Inc. as a controlling employer, did not ensure that S.G.M. Construction, LLC (subcontractor) protected their employees from injury while working on Alum-A-Pole pump jack scaffolds that were not secured as follows:    1.  Bracing was not installed at the bottoms of all scaffold poles.    2.  Bracing was not installed at intermediate locations on the scaffold poles to secure them to the structure.    AJM Framers, Inc. was previously cited for a violation of this Occupational Safety and Health Standard- 29 CFR 1926.452(j)(2) which was contained in OSHA inspection 312134380 Citation 1, Item 2 issued on August 1, 2008 and became a final order on August 20, 2008 with respect to a worksite located at 6748 S. Versailles Way, Aurora, CO 80014.
Recent events (2)
  • · I (R) $0
  • · Z (R) $6600

View AJM Framers, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 331081745.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.