OSHA Inspection: J.F.D. CONTRACTING, LLC

Issued

Dec 29, 2011

Abate by

Mar 16, 2012

Penalty

Initial $3,000 · Current $0 Reduced

General-duty citation text

29 CFR 1926.20(b)(1):  The employer did not initiate and maintain accident prevention programs as necessary to comply with this part:    Employees performing commercial carpentry construction were exposed to fall hazards associated with a 11.6 and 12.1 foot fall and the employer did not initiate and maintain an accident prevention program.

Issued

Dec 29, 2011

Abate by

Mar 16, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.20(b)(2):  The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s):    Employees performing commercial carpentry construction were exposed to fall hazards associated with a 11.6 and 12.1 foot fall and the employer did not initiate and maintain frequent and regular inspections of the job site by a competent person.

Issued

Dec 29, 2011

Abate by

Dec 30, 2011

Penalty

Initial $4,200 · Current $2,400 Reduced

General-duty citation text

29 CFR 1926.501(b)(1):  Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:    Employees performing commercial carpentry construction were exposed to fall hazards associated with a 11.6 and 12.1 foot fall and the employer did not ensure appropriate fall protection was implemented.

Issued

Dec 29, 2011

Abate by

Mar 16, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.503(a)(1):  The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    Employees performing commercial carpentry construction were exposed to fall hazards associated with an 11.6 and 12.1 foot fall while installing butt plates and the employer did not enable the employees to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards.