Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ADVANCED WAYNE CAIN AND SONS ROOFING AND SHEET METAL, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of ADVANCED WAYNE CAIN AND SONS ROOFING AND SHEET METAL, INC. in 2400 W BRADLEY AVE, CHAMPAIGN, IL 61821 (NAICS 238160). OSHA activity number 331086314.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Advanced Wayne Cain and Sons Roofing and Sheet Metal, INC. — free Get an email when a new federal OSHA severe-injury report for Advanced Wayne Cain and Sons Roofing and Sheet Metal, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2400 W BRADLEY AVE
City
CHAMPAIGN
State
IL
ZIP
61821
Mailing
1207 E UNIVERSITY AVE, URBANA, IL 61802
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
12
Ownership type
A

10 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 5 1 instance 3 exposed
Issued
Jan 17, 2012
Abate by
Jan 24, 2012
Penalty
Initial $3,500 · Current $700 Reduced
29 CFR 1910.178(l)(1)(i):     The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    Employees conducting commercial construction activities were exposed to struck-by hazards when working near a forktruck.  An employee operating the forktruck did not receive a practical evaluation.
Recent events (3)
  • — C (S) $3500
  • — F (S) $700
  • — Z (S) $3500

1910.178 L06

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 17, 2012
Abate by
Jan 24, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(6):     The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):    Employees conducting commercial construction activities were exposed to struck-by hazards when working near a forktruck.  The employer did not provide written certification evidence to show that the required powered industrial vehicle training and evaluation had been conducted for the operator.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1926.451 G01

Serious Gravity 10 1 instance 3 exposed
Issued
Jan 17, 2012
Abate by
Jan 24, 2012
Penalty
Initial $4,900 · Current $950 Reduced
29 CFR 1926.451(g)(1):     Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level.    Employees conducting commercial roofing activities were exposed to fall hazards of approximately 15.5 feet.  Three employees riding a scaffold attached to a forklift were not protected from falling.
Recent events (3)
  • — C (S) $4900
  • — F (S) $950
  • — Z (S) $4900

1926.454 A

Serious Gravity 5 1 instance 3 exposed
Issued
Jan 17, 2012
Abate by
Jan 24, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.454(a):     The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:    Employees conducting commercial roofing activities were exposed to fall hazards of approximately 15.5 feet.  The employer had not provided training to the employees on the hazards associated with working off of the scaffolding and procedures to minimize those hazards.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1926.501 B11

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 17, 2012
Abate by
Jan 24, 2012
Penalty
Initial $3,500 · Current $700 Reduced
29 CFR 1926.501(b)(11):      Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems:    An employee conducting commercial roofing activities was exposed to fall hazards of approximately 14 feet.  An employee installing the cap to the peak of the roof was not protected from falling at the gable ends of the roof.
Recent events (3)
  • — C (S) $3500
  • — F (S) $700
  • — Z (S) $3500

1926.503 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Jan 17, 2012
Abate by
Jan 24, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1):      The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    Employees conducting roofing activities were exposed to fall hazards of approximately 14 feet.  A training program was not provided to enable each employee to recognize the hazards of falling.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1926.20 B02

Repeat Gravity 5 1 instance 3 exposed
Issued
Jan 17, 2012
Abate by
Jan 24, 2012
Penalty
Initial $7,000 · Current $1,400 Reduced
29 CFR 1926.20(b)(2):     Programs did not provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers:    Employees conducting roofing activities on a flat roof were exposed to fall hazards of approximately 14 feet.  The employer did not have a competent person onsite able to recognize that employees were exposed to fall hazards.    THE ADVANCED WAYNE CAIN AND SONS ROOFING AND SHEET METAL, INC. WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1926.20(b)(2) WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 314848482, CITATION NUMBER 1, ITEM NUMBER 1, AND WAS AFFIRMED AS A FINAL ORDER ON FEBRUARY 23, 2011, WITH RESPECT TO A WORKPLACE LOCATED AT 1402 N DUNLAP, SAVOY, IL 61874.
Recent events (3)
  • — C (R) $7000
  • — F (R) $1400
  • — Z (R) $7000

1926.501 B10

Repeat Gravity 10 1 instance 3 exposed
Issued
Jan 17, 2012
Abate by
Jan 24, 2012
Penalty
Initial $9,800 · Current $1,950 Reduced
29 CFR 1926.501(b)(10):     Each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest:    Employees conducting roofing activities on a flat roof were exposed to fall hazards of approximately 14 feet.  No fall protection was utilized.     THE ADVANCED WAYNE CAIN AND SONS ROOFING AND SHEET METAL, INC. WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1926.501(b)(10) WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 314848482, CITATION NUMBER 1, ITEM NUMBER 2, AND WAS AFFIRMED AS A FINAL ORDER ON FEBRUARY 23, 2011, WITH RESPECT TO A WORKPLACE LOCATED AT 1402 N DUNLAP, SAVOY, IL 61874.
Recent events (3)
  • — C (R) $9800
  • — F (R) $1950
  • — Z (R) $9800

1926.1053 B01

Repeat Gravity 5 1 instance 3 exposed
Issued
Jan 17, 2012
Abate by
Jan 24, 2012
Penalty
Initial $7,000 · Current $1,400 Reduced
29 CFR 1926.1053(b)(1):      Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:    Employees using extension ladders to access a roof were exposed to fall hazards of approximately 9 feet.  The extension ladders' side rails did not extend at least 3 feet above the upper landing surface.     THE ADVANCED WAYNE CAIN AND SONS ROOFING AND SHEET METAL, INC. WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1926.1053(b)(1) WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 314848482, CITATION NUMBER 1, ITEM NUMBER 3, AND WAS AFFIRMED AS A FINAL ORDER ON FEBRUARY 23, 2011, WITH RESPECT TO A WORKPLACE LOCATED AT 1402 N DUNLAP, SAVOY, IL 61874.
Recent events (3)
  • — C (R) $7000
  • — F (R) $950
  • — Z (R) $7000

1926.503 B01

Other-than-serious 1 instance 1 exposed
Issued
Jan 17, 2012
Abate by
Jan 24, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.503(b)(1):      The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer:    Employees conducting roofing activities were exposed to fall hazards of approximately 14 feet.  The employer did not maintain evidence of the required training for each employee who might be exposed to fall hazards.  The employer did not provide a written certification record for employees working onsite who had been trained.
Recent events (3)
  • — F (O) $0
  • — C (O) $0
  • — Z (O) $0

View Advanced Wayne Cain and Sons Roofing and Sheet Metal, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331086314.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.