BRIDGEVIEW, IL —
OSHA Inspection: CONWELL CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CONWELL CORPORATION in 7451 W. 100TH PLACE, BRIDGEVIEW, IL 60455 (NAICS 484230). OSHA activity number 331090845.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONWELL CORPORATION
- Site address
- 7451 W. 100TH PLACE
- City
- BRIDGEVIEW
- State
- IL
- ZIP
- 60455
- Mailing
- 7451 W. 100TH PLACE, BRIDGEVIEW, IL 60455
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 484230
- Employees
- 30
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.23 C01
- Issued
- Dec 29, 2011
- Penalty
- Initial $3,375 · Current $0 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards: Note: Toeboards are only required when persons can pass, there is moving equipment or there is equipment with which falling materials could create a hazard. a) Mechanic Shop- On or about 11/10/11, employees were required to retrieve material and equipment from the Mechanic Shop mezzanine/platform located 12 feet above ground level. The employer did not provide a standard railing system to protect employees from falling. Employees were thereby exposed to the hazards associated with falls. No abatement certification or documentation required for this item.
Recent events (2)
- — I (O) $0
- — Z (S) $3375
1910.178 A04
- Issued
- Dec 29, 2011
- Penalty
- Initial $3,375 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(a)(4): Modifications or additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: (a)(LOCATION)(IDENTIFY SPECIFIC OPERATIONS AND/OR CONDITIONS)(DESCRIBE HAZARDS WHERE NECESSARY) a) Warehouse and Dock Area- On or about 11/10/11, the employer modified a powered industrial truck by attaching a metal cage to the forks of the truck without prior written approval from the manufacturer. Employees were exposed to falls and or struck by hazards from the attachment. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (O) $0
- — Z (S) $3375
1910.178 A05
- Issued
- Dec 29, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered: a) Warehouse and Dock Area- On or about11/10/11, the employer modified a powered industrial truck by attaching a metal cage to the forks of the truck without identifing the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with the load laterally centered. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.22 D01
- Issued
- Dec 29, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(d)(1): On every building or other structure, or part thereof, used for mercantile, business, industrial or storage purposes, the loads approved by the building official were not marked on plates of approved design and securely affixed in a conspicuous place in each space to which they relate. a) Mechanic Shop- On or about 11/10/11, employees were required to retrieve materials and equipment from the Mechanic Shop mezzanine/platform without the load approved by the building official affixed in a conspicuous place. No abatement certification or documentation required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 484230)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331090845.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.