KILLDEER, ND —
OSHA Inspection: NOBLE CASING, INC.
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of NOBLE CASING, INC. in SEC-5 T162N R-100W, KILLDEER, ND 58640 (NAICS 213112). OSHA activity number 331094334.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NOBLE CASING, INC.
- Site address
- SEC-5 T162N R-100W
- City
- KILLDEER
- State
- ND
- ZIP
- 58640
- Mailing
- 1708 47TH ST. WEST, WILLISTON, ND 58801
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 213112
- Employees
- 80
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.22 C
- Issued
- Mar 14, 2012
- Abate by
- Mar 19, 2012
- Penalty
- Initial $1,785 · Current $1,250 Reduced
General-duty citation text
29 CFR 1910.22(c): Covers and/or guardrails were not provided to protect personnel from the hazards of open pits, tanks, vats, ditches, etc: a) On or about October 27, 2011, and at times prior, employees were exposed to slipping, falling, and tripping hazards while crossing a ditch that was not provided with a cover/guard (19 inches deep). b) On or about October 27, 2011, and at times prior, employees were exposed to falls of approximately 6 feet in that, the reserve pit was not provided with a fall protection system.
Recent events (2)
- — I (O) $1249.5
- — Z (S) $1785
1910.23 A08 II
- Issued
- Mar 14, 2012
- Abate by
- Mar 19, 2012
- Penalty
- Initial $1,785 · Current $1,250 Reduced
General-duty citation text
29 CFR 1910.23(a)(8)(ii): A floor hole into which persons can accidentally walk was not guarded by a floor hole cover of standard strength and construction: a) On or about October 27, 2011 and times prior, employees were exposed to injury in that, several floor holes on the rig drill floor were not covered.
Recent events (2)
- — I (O) $1249.5
- — Z (S) $1785
1910.23 C01
- Issued
- Mar 14, 2012
- Abate by
- Mar 19, 2012
- Penalty
- Initial $2,975 · Current $2,083 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open sided floor(s) or platform(s) 4 feet or more above the adjacent floor or ground level were not guarded by standard railings (or the equivalent as specified in 29 CFR 1910.23(e)(3)(i) through (v): a) On or about October 27, 2011, and at times prior, employees were exposed to falls of approximately 26 feet at the V-door while working on the drill rig floor in that the toprail was missing.
Recent events (2)
- — I (O) $2082.5
- — Z (S) $2975
1910.219 D01
- Issued
- Mar 14, 2012
- Abate by
- Mar 19, 2012
- Penalty
- Initial $2,975 · Current $2,083 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified at 29 CFR 1910.219(m) & (o): a) On or about October 27, 2011, and at times prior, employees were exposed to injury in that, the pulley for the hydraulic unit to operate the floor tongs was inadequately guarded.
Recent events (2)
- — I (O) $2082.5
- — Z (S) $2975
1910.219 E03 I
- Issued
- Mar 14, 2012
- Abate by
- Mar 19, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical and inclined belts were not enclosed by a guard conforming to standards in paragraphs(m) and (o) of this section: a) On or about October 27, 2011, and at times prior, employees were exposed to injury in that, the V-belt for the hydraulic unit to operate the floor tongs was inadequately guarded.
Recent events (2)
- — I (O) $0
- — Z (S) $0
More inspections at Noble Casing, INC.
View Noble Casing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 213112)
More inspections in ND
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331094334.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.