Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ROPAK CENTRAL, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of ROPAK CENTRAL, INC. in 2350 S. LIVELY, ELK GROVE VILLAGE, IL 60007 (NAICS 326199). OSHA activity number 331095539.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ropak Central, INC. — free Get an email when a new federal OSHA severe-injury report for Ropak Central, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
ROPAK CENTRAL, INC.
Site address
2350 S. LIVELY
City
ELK GROVE VILLAGE
State
IL
ZIP
60007
Mailing
2350 S. LIVELY, ELK GROVE VILLAGE, IL 60007
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326199
Employees
143
Ownership type
A

5 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 10, 2012
Abate by
Feb 27, 2012
Penalty
Initial $7,000 · Current $7,000
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in the activities covered by this section:     a) The employer did not develop, document, and utilize energy control procedures, when performing servicing or maintenance on the Main Conveyor-Wulftec/Webber Brand and Injection Molding Machines.
Recent events (1)
  • — Z (S) $7000

1910.147 D02

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 10, 2012
Abate by
Feb 27, 2012
Penalty
Initial $7,000 · Current $7,000
29 CFR 1910.147(d)(2): The machine or equipment was not turned off or shut down using the procedures established for the machine or equipment:     a) Production Department - On or about November 28, 2011, employee was servicing the Main Conveyor - Wulftec/Webber Brand equipment without turning it off or shutting it down.
Recent events (1)
  • — Z (S) $7000

1910.147 D03

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 10, 2012
Abate by
Feb 27, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.147(d)(3): All energy isolating devices that are needed to control the energy to the machine or equipment was not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s):    a) Production Department - On or about November 28, 2011, employee did not isolate all energy sources to service the Main Conveyor - Wulftec/Webber equipment.
Recent events (1)
  • — Z (S) $0

1910.147 D04 I

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 10, 2012
Abate by
Feb 27, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:    a) Production Department - On or about November 28, 2011, employee did not use lockout device(s) when servicing the Main Conveyor Wulftec-Webber equipment.
Recent events (1)
  • — Z (S) $0

1910.147 C06 II

Other-than-serious 1 instance 1 exposed
Issued
Feb 10, 2012
Abate by
Feb 27, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(6)(ii): The periodic inspection certification of energy control procedures did not identify the machine or equipment, inspection date, employees included in the inspection, and the person performing the inspection:     Ropak Central, Inc. did not certify the periodic inspections of their energy control procedures to ensure that the procedures and requirements of their energy control program were being followed by employees.
Recent events (1)
  • — Z (O) $0

View Ropak Central, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331095539.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.