TWINSBURG, OH —
OSHA Inspection: J H INDUSTRIES INC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of J H INDUSTRIES INC in 1981 E. AURORA RD., TWINSBURG, OH 44087 (NAICS 332312). OSHA activity number 331102939.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J H INDUSTRIES INC
- Site address
- 1981 E. AURORA RD.
- City
- TWINSBURG
- State
- OH
- ZIP
- 44087
- Mailing
- 1981 E. AURORA RD., TWINSBURG, OH 44087
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 30
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.179 N02 II
- Issued
- Mar 1, 2012
- Abate by
- Mar 6, 2012
- Penalty
- Initial $4,900 · Current $714 Reduced
General-duty citation text
29 CFR 1910.179(n)(2)(ii): The load shall be attached to the load block hook by means of slings or other approved devices. The lifting device was not an approved device. The lifting devicde was not labeled with its rated capacity, not had it been inspected and load tested after it was repaired.
Recent events (3)
- — F (S) $714
- — C (S) $4900
- — Z (S) $4900
1910.212 A01
- Issued
- Mar 1, 2012
- Abate by
- Mar 6, 2012
- Penalty
- Initial $3,500 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: The Geka 70S Iron Worker was not guarded; the front punch pinch point was exposed to contact and actuation was by a foot pedal.
Recent events (3)
- — F (S) $1785
- — C (S) $3500
- — Z (S) $3500
1910.213 H03
- Issued
- Mar 1, 2012
- Abate by
- Mar 6, 2012
- Penalty
- Initial $3,500 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(h)(3): Radial saw(s) were not provided with an adjustable stop to prevent the forward travel of the blade beyond the position necessary to complete the cut in repetitive operations: The Dewalt radial arm saw had no stop to prevent the blade from extending past the edge of the cutting table.
Recent events (3)
- — F (S) $0
- — C (S) $3500
- — Z (S) $3500
1910.213 H04
- Issued
- Mar 1, 2012
- Abate by
- Mar 6, 2012
- Penalty
- Initial $0 · Current $1,785
General-duty citation text
29 CFR 1910.213(h)(4): Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator: The Dewalt radial arm saw did not return to the starting position when the employee released the operating crank.
Recent events (3)
- — F (S) $1785
- — C (S) $0
- — Z (S) $0
1910.243 C01
- Issued
- Mar 1, 2012
- Abate by
- Mar 6, 2012
- Penalty
- Initial $2,100 · Current $1,071 Reduced
General-duty citation text
29 CFR 1910.243(c)(1): Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard(s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4): On the first day of the inspection, employees were using hand held grinders, which did not have guards.
Recent events (3)
- — F (S) $1071
- — C (S) $2100
- — Z (S) $2100
1910.134 K06
- Issued
- Mar 1, 2012
- Abate by
- Mar 6, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of this section, in written or oral format to employees who wear respirators when such use was not required by the employer: Employees who do grinding work use respiratory protection on a voluntary basis; these employees were not provided with the required information.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at J H Industries INC
View J H Industries INC's full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331102939.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.