Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: WALTER'S MASONRY, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of WALTER'S MASONRY, INC. in 109 N. MILWAUKEE AVE., WHEELING, IL 60090 (NAICS 238140). OSHA activity number 331104992.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Walter'S Masonry, INC. for free Get an email when a new federal OSHA severe-injury report for Walter'S Masonry, INC. is published. One employer, no account, unsubscribe in one click.
Site address
109 N. MILWAUKEE AVE.
City
WHEELING
State
IL
ZIP
60090
Mailing
5201 CARRIAGEWAY DRIVE SUITE 203, ROLLING MEADOWS, IL 60008
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
5
Ownership type
Private (A)

5 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 exposed
Issued
Apr 9, 2012
Abate by
May 21, 2012
Penalty
Initial $600 · Current $600
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:    Walter's Masonry, Inc. failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:    Citation Number 		Item Number			Abatement Date  01			01				3/01/2012    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • · Z (O) $600

1910.178 L01 I

Serious Gravity 5 1 exposed
Issued
Jan 19, 2012
Abate by
Mar 1, 2012
Penalty
Initial $2,400 · Current $1,200 Reduced
29 CFR 1926.602(d):  The employer did not certify that each operator had been trained and evaluated as required by paragraph 29 CFR 1910.178(l):    29 CFR 1910.178(l)(1)(i):  The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    a)  The employer did not ensure that the operators of the Gradall all terrain forklifts were evaluated and competent to operate the powered industrial trucks.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • · I (S) $1200
  • · Z (S) $2400

1926.451 E01

Serious Gravity 5 1 exposed
Issued
Jan 19, 2012
Abate by
Jan 20, 2012
Penalty
Initial $3,000 · Current $1,500 Reduced
29 CFR 1926.451(e)(1):  Portable ladder, hook-on ladder, attachable ladder, stair tower, stairway-type ladder, ramp, runway, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar surface was not used to access scaffold platforms more than 2 feet above or below a point of access:    a)  Employees were exposed to fall hazards while climbing scaffold frames which were not designed to be climbed.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • · I (S) $1500
  • · Z (S) $3000

1926.451 E06 VI

Serious Gravity 5 1 exposed
Issued
Jan 19, 2012
Abate by
Jan 20, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.451(e)(6)(vi): Integral prefabricated scaffold access frames being used for access had a spacing greater than 16 3/4 inches:    a)  Scaffold frames being used to access the work platform had a spacing of approximately 19 inches.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.451 G01

Serious Gravity 5 1 exposed
Issued
Jan 19, 2012
Penalty
Initial $3,000 · Current $1,500 Reduced
29 CFR 1926.451(g)(1):  Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level:    a)  Employees working from frame scaffolding were exposed to fall hazards of approximately 24.9 feet.    No abatement certification or documentation is required for this item
Recent events (2)
  • · I (S) $1500
  • · Z (S) $3000

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 331104992.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.