Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WHITEWATER CREEK, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of WHITEWATER CREEK, INC. in 4107 SAMUELSON AVE, SANDPOINT, ID 83864 (NAICS 236116). OSHA activity number 331113589.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Whitewater Creek, INC. — free Get an email when a new federal OSHA severe-injury report for Whitewater Creek, INC. is published. One employer, no account, unsubscribe in one click.
Site address
4107 SAMUELSON AVE
City
SANDPOINT
State
ID
ZIP
83864
Mailing
POB 1478, HAYDEN, ID 83835
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236116
Employees
30
Ownership type
A

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 29, 2012
Penalty
Initial $3,500 · Current $1,750 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being thrown from the rough terrain forklift:    (a)  Throughout the entire job site:  On or about January 12, 2012, and at times prior thereto, the employer did not instruct and/or enforce the utilization of the seat belts by operator(s) of the Ingersol Rand Rough Terrain Forklift.    Note(1): Amongst other methods, several feasible and acceptable methods to correct this hazard is by complying with the manufacturer's operation guide regarding use of the manufacturer supplied seatbelt and/or QNWI/ITSDF B56.1-2005 (Reaffirmation of B56.1-2004), Section 7.41, Operator Restraint Systems.    Note(2): Abatement certification IS NOT required for this item.
Recent events (2)
  • — I (S) $1750
  • — Z (S) $3500

1910.178 L01 I

Serious Gravity 5 1 instance 25 exposed
Issued
Mar 29, 2012
Abate by
Apr 26, 2012
Penalty
Initial $0 · Current $0
29 CFR 1920.178(l)(1)(i): This provision is applicable to construction employment by 1926.602(d): The employer did not ensure that each powered industrial truck operator was competent to operator a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in 29 CFR 1910.178 paragraph (l):    (a)  On or about January 12, 2012, and at times prior thereto, the employer did not certify each operator had been trained and evaluated prior to the operation of a rough terrain forklift.    Note: Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 F05

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 29, 2012
Penalty
Initial $3,500 · Current $1,750 Reduced
29 CFR 1926.451(f)(5): Scaffolds were moved horizontally while employees were on them although the scaffolds were not designed for such movement by a registered professional engineer:    (a)  Throughout the job site:  On or about January 12, 2012, and at times prior thereto, employees were observed exposed to fall hazards while riding in a three sided wood box that was attached to the forks of a rough terrain forklift.    Note: Abatement certification IS NOT required for this item.
Recent events (2)
  • — I (S) $1750
  • — Z (S) $3500

1926.454 A

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 29, 2012
Abate by
Apr 26, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.    (a)  On or about January 12, 2012, and at times prior thereto, employees demonstrated a lack of understanding of the hazards associated with the type of scaffold they were utilizing and were exposed to a fall hazard.    Note: Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Whitewater Creek, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331113589.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.