Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,288Inspections Most recent open 2026-07-24 Last loaded 2026-07-29

OSHA Inspection: P & A ROOFING AND SHEET METAL, INC.

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of P & A ROOFING AND SHEET METAL, INC. in 80 PREMIUM OUTLETS BLVD., MERRIMACK, NH 03054 (NAICS 238160). OSHA activity number 331114009.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch P & a Roofing and Sheet Metal, INC. — free Get an email when a new federal OSHA severe-injury report for P & a Roofing and Sheet Metal, INC. is published. One employer, no account, unsubscribe in one click.
Site address
80 PREMIUM OUTLETS BLVD.
City
MERRIMACK
State
NH
ZIP
03054
Mailing
4495 35TH STREET, ORLANDO, FL 32811
Inspection type
Unprogrammed Other (I)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
15
Ownership type
A

5 citations on file for this inspection.

1926.25 C

Serious Gravity 1 10 instances 8 exposed
Issued
Jul 11, 2012
Abate by
Jul 12, 2012
Penalty
Initial $2,310 · Current $2,310
29 CFR 1926.25(c): Garbage and other oily, hazardous, or flammable waste were not disposed of at frequent and regular intervals.     a. Site- Employees were not protected from fire hazards when empty containers of flammable substances were allowed to accumulate in work areas and were not disposed of properly.
Recent events (4)
  • — R (S) $2310
  • — F (S) $2310
  • — C (S) $2310

1926.150 C01 VI

Serious Gravity 1 1 instance 8 exposed
Issued
Jul 11, 2012
Abate by
Jul 12, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.150(c)(1)(vi): A fire extinguisher, rated not less than 10B, was not provided within 50 feet of wherever more than 5 gallons of flammable or combustible liquids or 5 pounds of flammable gas were being used on the jobsite.    a. Site- employees were not protected from fire hazards when a fire extinguisher was not present within 50 feet of multiple 5 gallon drums of flammable Everguard bonding adhesive (product #-1121).
Recent events (4)
  • — R (S) $0
  • — F (S) $0
  • — C (S) $0

1926.503 A01

Serious Gravity 5 1 instance 6 exposed
Issued
Jul 11, 2012
Abate by
Jul 12, 2012
Penalty
Initial $3,850 · Current $3,850
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards.    a. Site- Employees working from roofs were not provided with fall protection training from the employer.
Recent events (4)
  • — R (S) $3850
  • — F (S) $3850
  • — C (S) $3850

1926.501 B10

Serious Gravity 5 1 instance 8 exposed
Issued
Jul 11, 2012
Abate by
Jul 12, 2012
Penalty
Initial $42,350 · Current $7,000 Reduced
29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.    a. Site- Employees performing roof work were not protected from falls of approximately 20 feet when fall protection was not used or provided.
Recent events (4)
  • — R (S) $7000
  • — F (S) $7000
  • — C (W) $42350

1926.602 D

Other-than-serious 1 instance 1 exposed
Issued
Jul 11, 2012
Abate by
Aug 1, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.602(d): The employer did not certify that each operator had been trained and evaluated as required by paragraph 29 CFR 1910.178(l). The requirements applicable to construction work under paragraph (d) of this section are identical to those set forth at paragraph (l) of 29 CFR 1910.178.      a. Site- an employee operating an all terrain fork lift was not provided with operator refresher training from the employer as required by 1910.178(l)(4)(iii).
Recent events (4)
  • — R (O) $0
  • — F (O) $0
  • — C (O) $0

View P & a Roofing and Sheet Metal, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331114009.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.