OSHA Inspection: HORSEHEADS AUTOMOTIVE RECYCLING, INC.

Issued

Mar 23, 2012

Abate by

Apr 7, 2012

Penalty

Initial $2,550 · Current $1,785 Reduced

General-duty citation text

29 CFR 1910.106(e)(6)(ii):    Class I liquids were  dispensed into containers without the nozzle and container electrically interconnected:      a)  Outside, on or about 1/19/12:  Employees dispense gasoline from a 1000 gallon fuel tank into vehicles and the dispensing hose and nozzle were not electrically interconnected.    Abatement certification must be submitted for this item.

Issued

Mar 23, 2012

Abate by

Mar 28, 2012

Penalty

Initial $2,040 · Current $1,428 Reduced

General-duty citation text

29 CFR 1910.219(d)(1):     Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):      (a) Loader Shop, on or about 1/19/2012:  Ingersoll-Rand compressor, in-running nip points of the belt and pulley were not provided with a guard.      Abatement certification must be submitted for this item.

Issued

Mar 23, 2012

Abate by

Mar 28, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.219(e)(1)(i):     Where both runs of horizontal belts are seven (7) feet or less from the floor level, the guard shall extend to at least fifteen (15) inches above the belt or to a standard height, except that where both runs of a horizontal belt are 42 inches or less from the floor, the belt shall be fully enclosed in accordance with paragraphs (m) and (o) of this section.    a)  Loader Shop, on or about 1/19/12:  Ingersoll-Rand compressor, in-running nip points of the belt were not guarded.    Abatement certification must be submitted for this item.