OSHA Inspection: DELLAS GRAPHICS, INC

Issued

2012-02-24 00:00:00

Abate by

2012-03-25 00:00:00

Penalty

Initial $2800.00 · Current $1500.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(ii)(B):     The employers lockout/tagout program did not contain specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy.    a)  Within the production areas, on or about 01/20/12;  The employer had not developed equipment sepcific energy control procedures for use when employees are exposed to hazardous energy.    Abatement certification must be provided for this item.

Issued

2012-02-24 00:00:00

Abate by

2012-03-10 00:00:00

Penalty

Initial $2800.00 · Current $1500.00 Reduced

General-duty citation text

29 CFR 1910.242(b):     Compressed air used for cleaning. Compressed air shall not be used for cleaning purposes except wherereduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment.    a)  In the production area, an employee was using a compressed air nozzle at approximately 80 psi for cleaning.  The nozzele was not equipped with blow out holes.    Abatement certification must be provided for this item.

Issued

2012-02-24 00:00:00

Abate by

2012-03-10 00:00:00

Penalty

Initial $2100.00 · Current $850.00 Reduced

General-duty citation text

29 CFR 1910.305(g)(1)(iv)(A):     Unless specifically permitted otherwise in paragraph (g)(1)(ii) of this section, flexible cords and cables may not be used; As a substitute for the fixed wiring of a structure.    A)  In the production area, on or about 01/20/12:  The stationary Nex press was powered by an extenion cord.    Abatement certification must be submitted for this item.