Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,871Inspections Most recent open 2026-07-30 Last loaded 2026-08-03

OSHA Inspection: BRUCE BOEYINGA DBA WOODWISE CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BRUCE BOEYINGA DBA WOODWISE CONSTRUCTION in 4009 TOWNE LAKES CIRCLE, GRAND CHUTE, WI 54913 (NAICS 236116). OSHA activity number 331899666.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Bruce Boeyinga DBA Woodwise Construction for free Get an email when a new federal OSHA severe-injury report for Bruce Boeyinga DBA Woodwise Construction is published. One employer, no account, unsubscribe in one click.
Site address
4009 TOWNE LAKES CIRCLE
City
GRAND CHUTE
State
WI
ZIP
54913
Mailing
577 CROUSETOWN RD, LEXINGTON, NC 27292
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236116
Employees
6
Ownership type
A

7 citations on file for this inspection.

1926.501 B14

Serious Gravity 5 2 instances 6 exposed
Issued
Feb 9, 2012
Penalty
Initial $2,400 · Current $2,400
29 CFR 1926.501(b)(14):     Each employee working on, at, above, or near wall openings (including those with chutes attached), where the outside bottom edge of the wall opening was 6 feet (1.8 m) or more above lower levels and the inside bottom edge of the wall opening is less than 39 inches (1.0 M) above the walking/working surface, is not protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system:      a)  Employees were walking/working on a second floor surface within three feet of door wall openings which had outside bottom edges greater than 9.5 feet above lower levels and inside bottom edges less than 5 inches above the walking/working surface without utilizing any fall protection equipment.    b)  Employees were walking/working on a second floor surface within three feet of window wall openings which had outside bottom edges greater than 9.5 feet above lower levels and inside bottom edges less than 30 inches above the walking/working surface without utilizing any fall protection equipment.      No Abatement Certification or Abatement Documentation required
Recent events (1)
  • · Z (S) $2400

1926.503 B01

Serious Gravity 10 1 instance 6 exposed
Issued
Feb 9, 2012
Abate by
Mar 23, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.503(b)(1):     The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer:      Employer did not provide certification of employee fall protection training for six employees who were working from heights of greater than 6 feet, greater than 9.5 feet, and greater than 15 feet above lower levels without utilizing any fall protection equipment.      Abatement Certification or Abatement Documentation required
Recent events (1)
  • · Z (S) $0

1926.1053 B01

Serious Gravity 5 1 instance 6 exposed
Issued
Feb 9, 2012
Abate by
Feb 10, 2012
Penalty
Initial $3,600 · Current $3,600
29 CFR 1926.1053(b)(1):     Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:      Employees were utilizing a Green Bull six foot step ladder to access/egress a second floor surface with the surface edge greater than 9.5 feet above a compacted surface without any grab rails above the upper landing surface.      No Abatement Certification or Abatement Documentation required
Recent events (1)
  • · Z (S) $3600

1926.1053 B04

Serious Gravity 5 1 instance 6 exposed
Issued
Feb 9, 2012
Abate by
Feb 10, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.1053(b)(4):     Ladder(s) were used for purposes other than the purpose for which they were designed:      Employees were using a folded/closed six foot Green Bull step ladder positioned with its top leaning against a building's outside wall to access/egress a second floor work surface.      No Abatement Certification or Abatement Documentation required
Recent events (1)
  • · Z (S) $0

1926.1053 B13

Serious Gravity 5 1 instance 6 exposed
Issued
Feb 9, 2012
Abate by
Feb 10, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.1053(b)(13):     The top or step of a stepladder was used as a step:      Employees were using the top of a Green Bull six foot step ladder as a step to access/egress a 2nd floor work surface which had a surface edge greater than 9.5 feet above a compacted surface.      No abatement Certification or Abatement Documentation required
Recent events (1)
  • · Z (S) $0

1926.1060 A01 III

Serious Gravity 5 1 instance 6 exposed
Issued
Feb 9, 2012
Abate by
Mar 23, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.1060(a)(1)(iii):     The employer did not ensure that each employee using ladders and/or stairways had been trained by a competent person in the proper construction, use, placement, and care in handling the ladders and/or stairways:      Employer did not provide training for employees who did not recognize fall from elevation hazard associated with selection and use of a six foot step ladder to access/egress a work surface 9.5 feet above lower surface, utilizing the top of the ladder as a step, and positioning the step ladder for use folded/closed and leaning against a wall.      Abatement Certification or Abatement Documentation required
Recent events (1)
  • · Z (S) $0

1926.501 B01

Repeat Gravity 10 2 instances 6 exposed
Issued
Feb 9, 2012
Abate by
Mar 2, 2012
Penalty
Initial $8,400 · Current $8,400
29 CFR 1926.501(b)(1):     Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest system:    a) An employee was working from a top plate of a wall at a height greater than six (6) feet above the second floor surface and greater than fifteen feet above a concrete lower level surface without utilizing any fall protection equipment.    b)  Employees were walking/working on a second floor surface near staged materials with the surface edge greater than 9.5 feet above compacted surface without utilizing any fall protection equipment.    c)  Employees were accessing work areas by walking along a second floor edge at a height greater than 9.5 feet above concrete surface which was between the areas without utilizing fall protection equipment.    THE BRUCE BOEYINGA DBA WOODWISE CONSTRUCTION WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 1926.501(b)(1) WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 98340, CITATION NUMBER 01, ITEM 001, AND WAS AFFIRMED AS A FINAL ORDER ON 11/02/11, WITH RESPECT TO A WORKPLACE LOCATED AT 1600 CORNFLOWER, PEORIA, IL  61615.    Abatement Certification or Abatement Documentation required
Recent events (1)
  • · Z (R) $8400

View Bruce Boeyinga DBA Woodwise Construction's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331899666.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.