Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HENRI STUDIO, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of HENRI STUDIO, LLC in 1250 HENRI DRIVE, WAUCONDA, IL 60084 (NAICS 327390). OSHA activity number 331904136.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Henri Studio, LLC — free Get an email when a new federal OSHA severe-injury report for Henri Studio, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
HENRI STUDIO, LLC
Site address
1250 HENRI DRIVE
City
WAUCONDA
State
IL
ZIP
60084
Mailing
1250 HENRI DRIVE, WAUCONDA, IL 60084
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327390
Employees
75
Ownership type
A

6 citations on file for this inspection.

1910.110 E04 III

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 19, 2012
Abate by
May 3, 2012
Penalty
Initial $2,975 · Current $2,083 Reduced
29 CFR 1910.110(e)(4)(iii): LP gas container(s) installed on internal combustion engine vehicles were not securely mounted to prevent jarring loose, slipping or rotating:     a) The employer failed to ensure that the Nissan 50 model #UJ02A25PV powered industrial truck had a functional bracket to secure the liquefied petroleum gas (LPG) tank from slipping of the rear of the truck.
Recent events (2)
  • — I (S) $2082.5
  • — Z (S) $2975

1910.110 F02 I

Serious Gravity 1 1 instance 5 exposed
Issued
Apr 19, 2012
Abate by
May 10, 2012
Penalty
Initial $1,785 · Current $1,250 Reduced
29 CFR 1910.110(f)(2)(i): LP gas containers in storage were not located so as to minimize exposure to excessive temperature rise, physical damage, or tampering by unauthorized persons:     a) Cement Mixing Room - The employer had two LP gas containers up against the wall and not located where they would be minimized from physical damage or tampering by unauthorized persons.
Recent events (2)
  • — I (S) $1249.5
  • — Z (S) $1785

1910.147 C06 I

Serious Gravity 5 1 instance 5 exposed
Issued
Apr 19, 2012
Abate by
May 10, 2012
Penalty
Initial $2,380 · Current $1,666 Reduced
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard were being followed:     a) Henri Studio Inc. did not conduct periodic inspections of their energy control procedures to ensure that the procedure and requirements of their energy control program were being followed by employees.
Recent events (2)
  • — I (S) $1666
  • — Z (S) $2380

1910.215 B09

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 19, 2012
Abate by
May 3, 2012
Penalty
Initial $1,785 · Current $1,250 Reduced
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel:     a) Statue Department - Baldor bench grinder model #187, was not equipped with an adjustable tongue guard so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel.
Recent events (2)
  • — I (S) $1249.5
  • — Z (S) $1785

1910.303 B02

Serious Gravity 1 3 instances 1 exposed
Issued
Apr 19, 2012
Abate by
May 3, 2012
Penalty
Initial $1,785 · Current $1,250 Reduced
29 CFR 1910.303(b)(2): Listed or labeled equipment were not used or installed in accordance with any instructions included in the listing or labeling:     Sculpting Area - Four outlet receptacles were installed in three metal junction boxes that were not in accordance with any instructions included in the listing or labeling.
Recent events (2)
  • — I (S) $1249.5
  • — Z (S) $1785

1910.157 C01

Other-than-serious 2 instances 5 exposed
Issued
Apr 19, 2012
Abate by
May 3, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.157(c)(1): The employer had portable fire extinguishers that were not mounted, located, identified and readily accessible to employees without subjecting the employees to possible injury:      Receiving Area - There were two fire extinguishers that were blocked by material and coats and not readily accessible in case of an emergency.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Henri Studio, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331904136.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.