Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SUPERIOR CONTRACTING INC.

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of SUPERIOR CONTRACTING INC. in 189 N. PEARL STREET, BUFFALO, NY 14202 (NAICS 238310). OSHA activity number 331916163.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Superior Contracting INC. — free Get an email when a new federal OSHA severe-injury report for Superior Contracting INC. is published. One employer, no account, unsubscribe in one click.
Site address
189 N. PEARL STREET
City
BUFFALO
State
NY
ZIP
14202
Mailing
1035 REIN ROAD, CHEEKTOWAGA, NY 14225
Inspection type
Unprogrammed Other (I)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238310
Employees
6
Ownership type
A

4 citations on file for this inspection.

1926.451 B01 I

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 2, 2012
Penalty
Initial $2,100 · Current $1,500 Reduced
29 CFR 1926.451(b)(1)(i):     Each platform unit (e.g., scaffold plank, fabricated plank, fabricated deck, or fabricated platform) was not installed so that the space between adjacent units and the space between the platform and the uprights were no more than 1 inch (2.5 cm) wide, except where the employer can demonstrate that a wider space is necessary.    a) On or about 02/14/12, on the 2nd floor of construction site, 189 N. Pearl St.,Buffalo, NY:  Employee installing a 2x4 on the ceiling while working from the top level of a mobile fabricated frame scaffold was exposed to a fall of approx. 11 ft. because the level was not fully planked. The width of the scaffold was 60 inches, and there were only two 19 in. wide "piks" in place instead of the three required.    NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2100

1926.451 E01

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 2, 2012
Penalty
Initial $1,785 · Current $0 Reduced
29 CFR 1926.451(e)(1):     When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, sturcure, personnel hoist, or similar surface was not used.     a) On or about 02/14/12, on the 2nd floor of construction site, 189 N. Pearl St.,Buffalo, NY:   Employee was exposed to a potential fall of up to 11 ft. while accessing the second level of a mobile fabricated frame scaffold by climbing the end frame of the scaffold. No ladder was provided.    NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $1785

1926.452 W02

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 2, 2012
Penalty
Initial $1,785 · Current $0 Reduced
29 CFR 1926.452(w)(2):     Scaffold casters and wheels were not locked with positive wheel and/or wheel and swivel locks, or equivalent means, to prevent movement of the scaffold while the scaffold was used in a stationary manner:    a) On or about 02/14/12, on the 2nd floor of construction site, 189 N. Pearl St.,Buffalo, NY:  Employee was exposed to potential fall of approx. 11 ft. while performing work from the 2nd level platform of a mobile fabricated frame scaffold. Only one of the four wheels on the scaffold was locked.    NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $1785

1926.454 A05

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 2, 2012
Abate by
May 2, 2012
Penalty
Initial $2,100 · Current $1,500 Reduced
29 CFR 1926.454(a)(5):    The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. The training shall include any other pertinent requirements of this subpart:    a) On or about 02/14/12, on the 2nd floor of construction site, 189 N. Pearl St.,Buffalo, NY: Employee performing work from the 2nd level platform of a mobile fabricated frame scaffold was not trained on how to recognize the hazards associated with scaffolds and the OSHA regulations pertaining to working from scaffolds.    ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2100

View Superior Contracting INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331916163.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.