OSHA Inspection: MECA & TECHNOLOGY MACHINE INC

Issued

Jun 25, 2012

Abate by

Jun 26, 2012

Penalty

Initial $2,975 · Current $2,083 Reduced

General-duty citation text

29 CFR 1910.219(f)(1): Gear(s) were not guarded by a complete enclosure or by one of the methods specified in 29 CFR 1910.219(f)(1)(ii) and (f)(1)(iii):    a) On 03/06/12, gears on the MECA 200 Engraver were not enclosed or otherwise guarded.    b) On 03/06/12, gears on the MECA 201 Engraver were not enclosed or otherwise guarded.         No Abatement Documentation or Abatement Certification Required.

Issued

Jun 25, 2012

Abate by

Jun 26, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven feet or less above floors or platforms were not enclosed:    a) On 03/06/12, the chain and sprocket on the MECA 201 Engraver was not enclosed.         No Abatement Documentation or Abatement Certification Required.

Issued

Jun 25, 2012

Abate by

Jul 10, 2012

Penalty

Initial $2,380 · Current $1,666 Reduced

General-duty citation text

29 CFR 1910.1200(f)(5)(i): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the hazardous chemical(s) contained therein:    a) On 02/28/2012, the plating tanks were not labeled with the identity of their contents.         Abatement Documentation and Abatement Certification required.

Issued

Jun 25, 2012

Abate by

Jul 10, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.1200(f)(5)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the appropriate hazard warnings:    a) On 02/28/2012, the plating tanks were not labeled with the hazards of their contents.         Abatement Documentation and Abatement Certification required.