WILMINGTON, OH —
OSHA Inspection: TIMBERTECH, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of TIMBERTECH, LLC in 894 PRAIRIE AVE, WILMINGTON, OH 45177 (NAICS 326199). OSHA activity number 332429604.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TIMBERTECH, LLC
- Site address
- 894 PRAIRIE AVE
- City
- WILMINGTON
- State
- OH
- ZIP
- 45177
- Mailing
- 894 PRAIRIE AVE, WILMINGTON, OH 45177
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 300
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 D03
- Issued
- Mar 19, 2012
- Abate by
- Apr 30, 2012
- Penalty
- Initial $2,550 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): Machine or equipment isolation. All energy isolating devices that are needed to control the energy to the machine or equipment shall be physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s). a) On or about February 21, 2012 electrical disconnet on the extruder line at the saw cut off section, was not actuated to disable power while unjamming.
Recent events (2)
- — I (S) $1785
- — Z (S) $2550
1910.147 D04 I
- Issued
- Mar 14, 2012
- Abate by
- Apr 25, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees. a) On or about February 21, 2012, a lockout device was not attached to the energy isolation point on the extruder line saw cut off area g the removal of a jam.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G02 III
- Issued
- Mar 14, 2012
- Penalty
- Initial $2,168 · Current $1,517 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables shall be connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints or terminal screws. a) Flexible cord attached to a control box for the grinder was not equipped with strain relief to prevent movement or damage to conductors. b) Flexible cord attached to a control boxl for the hydraulic pump was not equipped with strain relief to prevent movement or damage to conductors.
Recent events (2)
- — I (S) $1517.25
- — Z (S) $2167.5
1910.332 B01
- Issued
- Mar 14, 2012
- Abate by
- Apr 25, 2012
- Penalty
- Initial $5,000 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.332(b)(1): Practices addressed in this standard. Employees shall be trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertain to their respective job assignments. a) Employees who work on energized electrical circuits ranging from 110 Volt AC to 480 Volt AC had not received training on what and when to wear personal protective equipment to protect themselves against electric shock and arc flash.
Recent events (2)
- — I (S) $3500
- — Z (S) $5000
1910.335 A01 I
- Issued
- Mar 14, 2012
- Abate by
- Apr 25, 2012
- Penalty
- Initial $5,000 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.335(a)(1)(i): Employees working in areas where there are potential electrical hazards shall be provided with,and shall use, electrical protective equipment that is appropriate for the specific parts of the body to be protected and for the work to be performed. a) Employees performing energized electrical work up to 480 Volts AC had not been provided with personal protective equipment to protect themselves against electric shock and arc flash
Recent events (2)
- — I (S) $3500
- — Z (S) $5000
More inspections in this industry (NAICS 326199)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 332429604.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.