Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: FERRO PFANSTIEHL LABORATORIES, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of FERRO PFANSTIEHL LABORATORIES, INC. in 1219 GLEN ROCK AVENUE, WAUKEGAN, IL 60085 (NAICS 325412). OSHA activity number 332792027.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ferro Pfanstiehl Laboratories, INC. for free Get an email when a new federal OSHA severe-injury report for Ferro Pfanstiehl Laboratories, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1219 GLEN ROCK AVENUE
City
WAUKEGAN
State
IL
ZIP
60085
Mailing
1219 GLEN ROCK AVENUE, WAUKEGAN, IL 60085
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
325412
Employees
85
Ownership type
A

8 citations on file for this inspection.

1910.23 A08

Serious Gravity 1 1 instance 10 exposed
Issued
Jul 3, 2012
Penalty
Initial $2,550 · Current $1,785 Reduced
29 CFR 1910.23(a)(8):     Every floor hole into which persons can accidentally walk were not guarded:    a) In Building #2 - The employer failed to ensure that the floor hole next to the Tolhurst Center-Slung centrifuge  which employees can accidently walk into was guarded by a cover.
Recent events (2)
  • · I (S) $1785
  • · Z (S) $2550

1910.23 D01

Serious Gravity 5 2 instances 10 exposed
Issued
Jul 3, 2012
Penalty
Initial $3,400 · Current $2,380 Reduced
29 CFR 1910.23(d)(1):     Every flight of stairs having four or more risers was not equipped with standard stair railings or standard handrails as specified in paragraphs (d)(1)(i) through (v) of this section.    a) In Building #2 - The employer did not ensure that the stairs with 5 risers were equipped with a mid-rail.    b) In Building #5 - The employer did not ensure that the stairs with 11 risers were equipped with a mid-rail.
Recent events (2)
  • · I (S) $2380
  • · Z (S) $3400

1910.178 A04

Serious Gravity 5 2 instances 10 exposed
Issued
Jul 3, 2012
Abate by
Jul 25, 2012
Penalty
Initial $3,400 · Current $2,380 Reduced
29 CFR 1910.178(a)(4):     Modifications and additions which affect capacity and safe operation of powered industrial trucks were performed by the employer without the manufacturer's prior written approval:    a) In Building #3 - The employer did not obtain manufacturer's prior written approval for the Mitsubishi Caterpillar forklift model EP-20T-36A, Serial No.6mm02107, that was modified with a Liftomatic drum catcher attachment.      b) In Building #8 - The employer did not obtain manufacturer's prior written approval for the Mitsubishi Caterpillar forklift model EP-20T-36V, Serial No. 6mm01839, that was modified with a Liftomatic drum catcher attachment.
Recent events (2)
  • · I (S) $2380
  • · Z (S) $3400

1910.178 A05

Serious Gravity 5 2 instances 10 exposed
Issued
Jul 3, 2012
Penalty
Initial $3,400 · Current $2,380 Reduced
29 CFR 1910.178(a)(5):     The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered:    a) In Building #3 - The employer did not ensure that the Mitsubishi Caterpillar forklift model EP-20T-36A, Serial No.6mm02107, modified by a Liftomatic drum catcher attachment, be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered.    b) In Building #8 - The employer did not ensure that the Mitsubishi Caterpillar forklift model EP-20T-36V, Serial No.6mm01839, modified by a Liftomatic drum catcher attachment, be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered.
Recent events (2)
  • · I (S) $2380
  • · Z (S) $3400

1910.178 G02

Serious Gravity 5 2 instances 10 exposed
Issued
Jul 3, 2012
Abate by
Jul 25, 2012
Penalty
Initial $3,400 · Current $2,380 Reduced
29 CFR 1910.178(g)(2):     Battery charging apparatus for industrial trucks located in battery changing and charging installation was not protected from damage by trucks:    a) In Building #3 - The employer did not ensure that the battery charging apparatus for industrial trucks was protected from damage by trucks.    b) In Building #8 - The employer did not ensure that the battery charging apparatus for industrial trucks was protected from damage by trucks.
Recent events (2)
  • · I (S) $2380
  • · Z (S) $3400

1910.178 Q07

Serious Gravity 1 2 instances 4 exposed
Issued
Jul 3, 2012
Penalty
Initial $2,550 · Current $1,785 Reduced
29 CFR 1910.178(q)(7):     Industrial trucks were being placed in service after the examination showed condition(s) adversely affecting the safety of the vehicle:      a) In Building #3 - The employer did not ensure that the Caterpillar forklift L-3103 with a missing brake cover was not taken out of service until repaired.    b) In Building #8 - The employer did not ensure that the Caterpillar forklift L-3102 with a missing brake cover was not taken out of service until repaired.
Recent events (2)
  • · I (S) $1785
  • · Z (S) $2550

1910.37 B02

Other-than-serious 1 instance 10 exposed
Issued
Jul 3, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.37(b)(2):     Each exit was not clearly visible and marked by a sign reading "Exit":    a) In Building #3A - The employer failed to ensure that the exit was clearly marked by a sign reading "Exit".
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1910.305 B01 II

Other-than-serious 1 instance 10 exposed
Issued
Jul 3, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.305(b)(1)(ii):  Unused openings in boxes, cabinets, or fittings were not effectively closed:    a) In Building 3A - A wall mounted metal junction box was missing a cover.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

View Ferro Pfanstiehl Laboratories, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 332792027.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.