DRIPPING SPRINGS, TX —
OSHA Inspection: JR STUCCO
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JR STUCCO in POLO CLUB DRIVE AND U.S. HWY 290 W., DRIPPING SPRINGS, TX 78620 (NAICS 238140). OSHA activity number 332792555.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JR STUCCO
- Site address
- POLO CLUB DRIVE AND U.S. HWY 290 W.
- City
- DRIPPING SPRINGS
- State
- TX
- ZIP
- 78620
- Mailing
- 19016 FREDERICK RD., TOMBALL, TX 77377
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 13
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.21 B02
- Issued
- Jun 7, 2012
- Abate by
- Jun 21, 2012
- Penalty
- Initial $1,980 · Current $900 Reduced
General-duty citation text
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury: On or about March 6, 2012, five employees were constructing a masonry wall on the job site without the employer providing training on the recognition and avoidance of hazards, exposing the employees to a hazard such as, but not limited to, being struck by a falling concrete block wall. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that each employee performing work for the company receives training on the hazards they can be exposed to.
Recent events (2)
- — I (S) $900
- — Z (S) $1980
1926.454 A
- Issued
- Jun 7, 2012
- Abate by
- Jun 21, 2012
- Penalty
- Initial $2,640 · Current $1,400 Reduced
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards: On or about March 6, 2012, employees were performing masonry work from tubular welded scaffolding that was erected on the inside of the wall under construction up to approximately 13 feet high without the employees receiving scaffolding training from the employer, exposing the employees to a fall hazard. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that each employee required to work from scaffolding is trained on the hazards associated with it.
Recent events (2)
- — I (S) $1400
- — Z (S) $2640
1926.701 B
- Issued
- Jun 7, 2012
- Abate by
- Jun 8, 2012
- Penalty
- Initial $3,300 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.701(b): All protruding reinforcing steel, onto and/or into which employees could fall or come against, was not guarded to eliminate the hazard of impalement: On or about March 6, 2012, employees were working near the open ends of the tubular welded scaffolding up to approximately 13 feet high where protruding rebar that measured approximately 1 and 1/2 feet high was not covered, exposing the employees to an impalement hazard. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that all protruding rebar is covered with protective caps when workers are required to work in the area.
Recent events (2)
- — I (S) $2000
- — Z (S) $3300
1926.706 A01
- Issued
- Jun 7, 2012
- Abate by
- Jun 8, 2012
- Penalty
- Initial $3,300 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.706(a)(1): A limited access zone was not established prior to the start of construction on a masonry wall: On or about March 6, 2012, employees were working around the danger zone of a masonry wall that they had built and another wall that was under construction without the employer establishing a limited access zone, exposing the employees to the hazard of being crushed by a falling wall. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that a limited access zone is designated prior to the erection of masonry walls.
Recent events (2)
- — I (S) $2000
- — Z (S) $3300
1926.706 B
- Issued
- Jun 7, 2012
- Abate by
- Jun 8, 2012
- Penalty
- Initial $4,620 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.706(b): Masonry walls over eight feet in height were not adequately braced to prevent overturning and to prevent collapse until permanent supporting elements of the structure were in place: On or about March 6, 2012, employees were walking in front of and behind a previously erected masonry wall and another masonry wall that was under construction without the walls being braced to prevent overturning, exposing the employees to the hazard of being crushed by a falling wall. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that each masonry wall over eight feet in height is adequately braced to prevent overturning.
Recent events (2)
- — I (S) $2000
- — Z (S) $4620
1926.451 B01
- Issued
- Jun 7, 2012
- Abate by
- Jun 8, 2012
- Penalty
- Initial $9,240 · Current $5,000 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii): On or about March 6, 2012, four employees were working on the tops of the first and second level platforms of the tubular welded scaffolding up to approximately 13 feet high without each platform being fully planked, exposing the employees to a fall hazard. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that scaffolding platforms are fully planked where employees are working. The Jr Stucco Company was previously cited for a violation of this Occupational Safety and Standard or its equivalent standard 29 CFR 1926.451(b)(1), which was contained in Inspection Number: 312920085, Citation Number: 01, Item: 01, issued on: December 17, 2009, and was affirmed as a Final Order on January 12, 2010, with respect to a workplace located at: 8210 Broadway, Pearland, TX 77581.
Recent events (2)
- — I (R) $5000
- — Z (R) $9240
1926.451 G01 VII
- Issued
- Jun 7, 2012
- Abate by
- Jun 8, 2012
- Penalty
- Initial $23,100 · Current $3,300 Reduced
General-duty citation text
29 CFR 1926.451(g)(1)(vii): For all scaffolds not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, each employee shall be protected by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section. On or about March 6, 2012, two employees were working on the top of the second tier of the tubular welded scaffolding up to approximately 13 feet high without guard rails installed on the sides and open ends, exposing the employees to a fall hazard. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that all open sides of a scaffold over 10 feet high have guard rails installed. The Jr Stucco Company was previously cited for a violation of this Occupational Safety and Standard or its equivalent standard 29 CFR 1926.451(g)(4)(iii), which was contained in Inspection Number: 315195149, Citation Number: 01, Item: 02, issued on: April 29, 2011, and was affirmed as a Final Order on June 6, 2011, with respect to a workplace located at: 19099 I-45 South, Shenandoah, TX 77385.
Recent events (2)
- — I (S) $3300
- — Z (R) $23100
More inspections at JR Stucco
View JR Stucco's full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 332792555.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.