BLISS, NY ·
OSHA Inspection: R.S. MAHER & SON, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of R.S. MAHER & SON, INC. in 3200 ROUTE 39, BLISS, NY 14024 (NAICS 811121). OSHA activity number 332793397.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- R.S. MAHER & SON, INC.
- Site address
- 3200 ROUTE 39
- City
- BLISS
- State
- NY
- ZIP
- 14024
- Mailing
- 3200 ROUTE 39, BLISS, NY 14024
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811121
- Employees
- 30
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.107 C06
- Issued
- Apr 11, 2012
- Abate by
- May 11, 2012
- Penalty
- Initial $2,380 · Current $1,430 Reduced
General-duty citation text
29 CFR 1910.107(c)(6): Electrical wiring and equipment not subject to deposits of combustible residues but located in a spraying area as herein defined were not explosion-proof type approved for Class I, group D locations and did not otherwise conform to the provisions of subpart S of this part, for Class I, Division 1, Hazardous Locations: a) Spray Painting Area - ON or about 3/6/12, electrical outlets and light fixtures located within the spray area were not approved for Class 1, Division 1 hazardous locations. Abatement Certification Required
Recent events (2)
- · I (S) $1430
- · Z (S) $2380
1910.107 E09
- Issued
- Apr 11, 2012
- Abate by
- Apr 18, 2012
- Penalty
- Initial $2,380 · Current $1,430 Reduced
General-duty citation text
1910.107(e)(9): Flammable or combustible liquids for use in spraying operations were transferred from one container to another without both containers being effectively bonded and grounded to prevent discharge sparks of static electricity: a) Spray Painting Area - On or about 3/6/12, the following products: DuPont Chromabase acrylic urethane (FP = 20-73 deg F) cut with DuPont Chromasystem Basemaker (FP = 20-73 deg F), Finish 1 Etching Filler (FP = 48 deg F) cut with Finish 1 Etch Primere Reducer (FP = 48 deg F), and Premium Commercial Coating enamel (FP = 20 deg F) cut with Premium Commercial Coating (FP = 4 deg F) were transferred from 1 gallon metal containers to the metal spray pot without bonding and grounding the containers in order to prevent discharge sparks of static electricity. Abatement Certification Required
Recent events (2)
- · I (S) $1430
- · Z (S) $2380
1910.134 E01
- Issued
- Apr 11, 2012
- Abate by
- May 11, 2012
- Penalty
- Initial $2,380 · Current $1,430 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) Spray Painting Area - On or about 3/6/12, the employer did not provide a medical evaluation to employees who were required, by the employer, to wear half-mask air-purifying respirators while spray painting. Abatement Certification Required
Recent events (2)
- · I (S) $1430
- · Z (S) $2380
1910.134 F02
- Issued
- Apr 11, 2012
- Abate by
- May 11, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): The employer did not ensure that employees using a tight-fitting face-piece respirator were fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter: a) Spray Painting Area - On or about 3/6/12, employees who were required, by the employer, to wear half-mask air-purifying respirators while spray painting were not fit-tested prior to the initial use of the respirator. Abatement Certification Required
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.134 K01
- Issued
- Apr 11, 2012
- Abate by
- May 11, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
1910.134(k)(1): The employer did not provide effective training to employees who are required to wear respirators and ensure that they could demonstrate knowledge of the requirements contained in 29 CFR 1910.134(k)(1)(i) through (vii): a) Spray Painting Area - On or about 3/6/12, the employer did not provide training to employees who are required, by the employer, to wear half-mask air-purifying respirators while spray painting. The employees could not demonstrate knowledge of at least the following: 1) Why the respirator is necessary and how improper fit, usage, or maintenance can compromise the protective effect of the respirator. 2) What the limitations and capabilities of the respirator are. 3) How to inspect and check the seals of the respirator. 4) What the procedures are for proper maintenance and storage of the respirator. 5) How to recognize medical signs and symptoms that may limit or prevent the effective use of the respirator. and 6) The general requirements of this section. Abatement Certification Required
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections at R.S. Maher & SON, INC.
View R.S. Maher & SON, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 811121)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 332793397.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.