OSHA Inspection: NATIONAL FRAMING & FINISHING

Issued

Jun 12, 2012

Abate by

Jun 26, 2012

Penalty

Initial $3,000 · Current $3,000

General-duty citation text

29 CFR 1926.102(a)(1):  Employees were not provided with eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:    Employees were not using eye protection while using nail guns to install roofing materials.    Abatement certification and abatement documentation is required for this violation.  The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos, which you believe will be helpful.  The abatement certification sheet is enclosed  with the citation(s).

Issued

Jun 12, 2012

Abate by

Jun 26, 2012

Penalty

Initial $4,200 · Current $4,200

General-duty citation text

29 CFR 1926.501(b)(4)(i):  Each employee on walking/working surfaces were not protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes:    While performing roofing work on an approximately 5:12 pitch, 23 foot high roof employees worked around 4x8' holes in the roof that were not protected from being fallen through.      Abatement certification and abatement documentation is required for this violation.  The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos, which you believe will be helpful.  The abatement certification sheet is enclosed  with the citation(s).

Issued

Jun 12, 2012

Abate by

Jun 26, 2012

Penalty

Initial $3,000 · Current $3,000

General-duty citation text

29 CFR 1926.501(b)13):  Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels was not protected by guardrail systems, safety net systems, or personal fall arrest systems:    Employees were performing roofing work on an approximately 5:12 pitch, 23 foot high roof without the use of fall protection.    Abatement certification and abatement documentation is required for this violation.  The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos, which you believe will be helpful.  The abatement certification sheet is enclosed  with the citation(s).