Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: DATWYLER PHARMA PACKAGING USA INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of DATWYLER PHARMA PACKAGING USA INC. in 9012 PENNSAUKEN HIGHWAY, PENNSAUKEN, NJ 08110 (NAICS 333220). OSHA activity number 332800143.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Datwyler Pharma Packaging USA INC. for free Get an email when a new federal OSHA severe-injury report for Datwyler Pharma Packaging USA INC. is published. One employer, no account, unsubscribe in one click.
Site address
9012 PENNSAUKEN HIGHWAY
City
PENNSAUKEN
State
NJ
ZIP
08110
Mailing
9012 PENNSAUKEN HIGHWAY, PENNSAUKEN, NJ 08110
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Union (A)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333220
Employees
325
Ownership type
Private (A)

4 citations on file for this inspection.

1910.133 A01

Serious Gravity 1 1 instance 8 exposed
Issued
Jul 19, 2012
Abate by
Aug 9, 2012
Penalty
Initial $3,300 · Current $1,650 Reduced
29 CFR 1910.133(a)(1):     The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:    a) Abboject room: The employer did not ensure that employees wore safety glasses while cleaning the Abboject machines with compressed air, on or about 3/8/12.      NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • · I (S) $1650
  • · Z (S) $3300

1910.212 A03 II

Serious Gravity 5 1 instance 6 exposed
Issued
Jul 19, 2012
Abate by
Aug 9, 2012
Penalty
Initial $6,600 · Current $3,300 Reduced
29 CFR 1910.212(a)(3)(ii):     Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):    a) Abboject room: The spring loaded fourth plate in the die used on the Abboject machine was not guarded upon the die opening to protect employees from crushing hazards, on or about 3/8/12.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • · I (S) $3300
  • · Z (S) $6600

1910.147 C04 I

Repeat Gravity 5 1 instance 3 exposed
Issued
Jul 19, 2012
Abate by
Aug 9, 2012
Penalty
Initial $22,000 · Current $11,000 Reduced
29 CFR 1910.147(c)(4)(i):     Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    a) Abboject room: Procedures for locking out the Abboject press machine were not utilized when the sensors for the distal plate were adjusted, on or about 3/8/12.     Datwyler Pharma Packaging Inc; WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD, ITS EQUIVALENT, OR ESSENTIALLY SIMILAR STANDARD, 29 CFR 1910.147 (c)(4)(i), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 314211301 CITATION NUMBER 1, ITEM NUMBER 1A, ISSUED ON 8/11/2010. NOTE: FINAL ORDER DATE - 9/3/2010.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • · I (R) $11000
  • · Z (R) $22000

1910.1200 G01

Deleted Other-than-serious 1 instance 325 exposed
Issued
Jul 19, 2012
Abate by
Aug 9, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(1):     Chemical manufacturers and importers did not obtain or develop a material safety data sheet for each hazardous chemical they produced or imported:      a) Throughout facility: The employer did not develop material safety data sheets for the rubber used in the facility to make the company's final products, such as, but not limited to, bottle caps and syringe sleeves, on or about 3/8/12.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

View Datwyler Pharma Packaging USA INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 332800143.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.