TWIN FALLS, ID —
OSHA Inspection: WAGNER TRANSPORTATION COMPANY
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of WAGNER TRANSPORTATION COMPANY in 410 NORTH LOCUST STREET, TWIN FALLS, ID 83303 (NAICS 484230). OSHA activity number 332804772.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WAGNER TRANSPORTATION COMPANY
- Site address
- 410 NORTH LOCUST STREET
- City
- TWIN FALLS
- State
- ID
- ZIP
- 83303
- Mailing
- BOX 192, TWIN FALLS, ID 83303
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 484230
- Employees
- 19
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.215 A04
- Issued
- Jun 8, 2012
- Penalty
- Initial $1,530 · Current $1,530
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: (a) Repair Shop: On 03/08/12 and at time s prior thereto, a pedestal mounted grinder work rest for the right abrasive wheel was set to seven sixteenth (7/16) inch. Note: Abatement certification and documentation are NOT required for this item.
Recent events (1)
- — Z (S) $1530
1910.215 B09
- Issued
- Jun 8, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) Repair Shop: On 03/08/2012, and at times prior thereto, the right wheel tongue guard was set to 7/16" on the grinder to the right of the Utility Co grinder. (b) Repair Shop: On 03/08/2012, and at times prior thereto, the tongue guard was missing on the Utility Co grinder serial # 808912. Note: Abatement certification and documentation are NOT required for htis item.
Recent events (1)
- — Z (S) $0
1910.178 L04 III
- Issued
- Jun 8, 2012
- Abate by
- Jul 23, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not conducted at least once every three years: Site: On 03/08/2012 and at times prior thereto, the Powered Industrial Truck trainer was not evaluating performance as required. NOTE: Abatement Certification IS required for this item.
Recent events (1)
- — Z (O) $0
1910.178 L06
- Issued
- Jun 8, 2012
- Abate by
- Jul 23, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator had been trained and evaluated as required: Site: On 03/08/2012, and at times prior thereto, the powered industrial truck trainer did not maintain a record of training conducted with each employee authorized to operate the forklifts. Note: Abatement certification IS required for this item.
Recent events (1)
- — Z (O) $0
1910.254 D09 III
- Issued
- Jun 8, 2012
- Abate by
- Jul 23, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.254(d)(9)(iii): Cabled with damaged insulation or exposed bare conductors were not replaced: Repair Shop: On 03/08/2012, and at times prior thereto, the ground lead of two Linde VI 252-C welders had cuts that exposed the conductor. Note 1: Abatement certification IS required for this item. Note 2: Work cables may be repaired under certain conditions.
Recent events (1)
- — Z (O) $0
1910.305 A02 IX
- Issued
- Jun 8, 2012
- Abate by
- Jul 23, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(a)(2)(ix): All lamps for general illumination were not protected from accidental contact or breakage by a suitable fixture or lampholder with a guard: a) Parts Room main floor: On 03/08/2012, and at times prior thereto, unprotected and energized incandescent bulbs were located at heights from 6'7" to 6' 9" from the floor. b) Parts Room mezzanine: On 03/08/2012, and at times prior thereto, unprotected and energized incandescent bulbs were located at a height of 6' from the floor. c) Parts Warehouse Mezzanine: On 03/08/2012, and at times prior thereto, unprotected and energized flourescent bulbs were located at a height of 6' from the floor. Note: Abatement certification is required for this item.
Recent events (1)
- — Z (O) $0
More inspections at Wagner Transportation Company
View Wagner Transportation Company's full OSHA safety record →
More inspections in this industry (NAICS 484230)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 332804772.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.