Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,124Inspections Most recent open 2026-08-25 Last loaded 2026-08-28

OSHA Inspection: NASH EQUIPMENT INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of NASH EQUIPMENT INC. in 331 ROUTE 26, COLEBROOK, NH 03576 (NAICS 423810). OSHA activity number 332808286.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Nash Equipment INC. for free Get an email when a new federal OSHA severe-injury report for Nash Equipment INC. is published. One employer, no account, unsubscribe in one click.
Establishment
NASH EQUIPMENT INC.
Site address
331 ROUTE 26
City
COLEBROOK
State
NH
ZIP
03576
Mailing
331 ROUTE 26, COLEBROOK, NH 03576
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423810
Employees
10
Ownership type
Private (A)

6 citations on file for this inspection.

1910.23 C01

Other-than-serious 1 instance 1 exposed
Issued
Jun 7, 2012
Abate by
Jun 8, 2012
Penalty
Initial $3,000 · Current $0 Reduced
29 CFR 1910.23(c)(1):  Open-sided floor(s) or platform(s) 4 feet or more above the adjacent floor or ground level were not guarded by standard railings (or the equivalent as specified in 29 CFR 1910.23(e)(3)(i) through (v)), on all open sides:      a.  Overhead Storage Area - Guardrails were not provided to prevent employee falls.
Recent events (2)
  • · I (O) $0
  • · Z (S) $3000

1910.37 A01

Other-than-serious 4 exposed
Issued
Jun 7, 2012
Abate by
Jun 8, 2012
Penalty
Initial $2,400 · Current $0 Reduced
29 CFR 1910.37(a)(1):  Exit routes must be kept free of explosive or highly flammable furnishings or other decorations.      a.  Site - Exit routes were not maintained and free of flammable gas hazards, in that welding acetylene tanks were permitted to be stored in exit routes.
Recent events (2)
  • · I (O) $0
  • · Z (S) $2400

1910.37 A03

Other-than-serious 1 instance 4 exposed
Issued
Jun 7, 2012
Abate by
Jun 8, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.37(a)(3):  Exit route(s) were not kept free and unobstructed:      a.  Emergency exit routes was blocked off and not maintained.
Recent events (2)
  • · I (O) $0
  • · Z (S) $0

1910.67 C02 V

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Jun 7, 2012
Abate by
Jun 8, 2012
Penalty
Initial $3,000 · Current $0 Reduced
29 CFR 1910.67(c)(2)(v):  A body belt was not worn and a lanyard attached to the boom or basket when working from an aerial lift:      a.  Site - Employees assigned to operate the Skyjack (Model SJB-46TK S/N 94022) aerial lift were not utilizing fall protection.
Recent events (2)
  • · I (S) $0
  • · Z (S) $3000

1910.178 A04

Other-than-serious 1 instance 1 exposed
Issued
Jun 7, 2012
Abate by
Jun 8, 2012
Penalty
Initial $3,000 · Current $0 Reduced
29 CFR 1910.178(a)(4):  Modifications or additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:      a.  Site - Prior written approval was not obtained for the boom attachment which was used on the CTM (model A084) Forklift.
Recent events (2)
  • · I (O) $0
  • · Z (S) $3000

1910.178 L01 I

Serious Gravity 5 1 instance 5 exposed
Issued
Jun 7, 2012
Abate by
Jun 8, 2012
Penalty
Initial $2,400 · Current $1,200 Reduced
29 CFR 1910.178(l)(1)(i):  The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    a. Site - Employees assigned to operate the TCM forklift were not trained in its use.
Recent events (2)
  • · I (S) $1200
  • · Z (S) $2400

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 332808286.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.