Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SANZ ROOFING CORPORATION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SANZ ROOFING CORPORATION in 1736 N. MOHAWK ST., CHICAGO, IL 60614 (NAICS 238160). OSHA activity number 332812072.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Sanz Roofing Corporation — free Get an email when a new federal OSHA severe-injury report for Sanz Roofing Corporation is published. One employer, no account, unsubscribe in one click.
Site address
1736 N. MOHAWK ST.
City
CHICAGO
State
IL
ZIP
60614
Mailing
6337 S. KEELER AVE., CHICAGO, IL 60629
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
5
Ownership type
A

6 citations on file for this inspection.

1926.501 B04 I

Serious Gravity 10 2 instances 3 exposed
Issued
Apr 9, 2012
Abate by
Apr 10, 2012
Penalty
Initial $4,620 · Current $4,620
29 CFR 1926.501(b)(4)(i):  Each employee on walking/working surfaces was not protected from falling through holes (including skylights), more than six feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes:    a)  Employees were exposed to falls of approximately 16 feet while working around unprotected skylights.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $4620

1926.1053 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 9, 2012
Abate by
Apr 10, 2012
Penalty
Initial $3,300 · Current $3,300
29 CFR 1926.1053(b)(1):  When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder.  In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.     a)  Employees were using an extension ladder which did not extend 3 feet above the upper landing being accessed.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $3300

1926.501 B03

Repeat Gravity 10 1 exposed
Issued
Apr 9, 2012
Abate by
Apr 10, 2012
Penalty
Initial $9,240 · Current $9,240
29 CFR 1926.501(b)(3):  Each employee in a hoist area was not protected from falling 6 feet (1.8m) or more to lower levels by guardrail systems or personal fall arrest systems:    a)  Employees working in a hoist area were exposed to fall hazards of approximately 43 feet while performing roofing work.    Sanz Roofing Corporation was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(3) which was contained in OSHA violation number 315508614, citation 1, item 2, issued on May 16, 2011 and became final order on or about May 31, 2011 with respect to a workplace located at 400 E. Golf Rd., Arlington Heights, IL 60005.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (R) $9240

1926.502 J07 I

Repeat Gravity 10 1 instance 1 exposed
Issued
Apr 9, 2012
Abate by
Apr 10, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.502(j)(7)(i):  Material and equipment shall not be stored within 6 feet (1.8m) of a roof edge unless guardrails are erected at the edge:    a)  Materials were places and stored within 6 feet of a roof edge.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (R) $0

1926.501 B10

Repeat Gravity 10 1 instance 3 exposed
Issued
Apr 9, 2012
Abate by
Apr 10, 2012
Penalty
Initial $9,240 · Current $9,240
29 CFR 1926.501(b)(10):  Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and fuardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.  Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system:    a)  Employees engaged in roofing activities were exposed to falls of approximately 43 feet.    Sanz Roofing Corporation was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(10) which was contained in OSHA violation number 315508614, citation 1, item 3, issued on May 16, 2011 and became final order on or about May 31, 2011 with respect to a workplace located at 400 E. Golf Rd., Arlington Heights, IL 60005.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (R) $9240

1926.503 B01

Other-than-serious 4 exposed
Issued
Apr 9, 2012
Abate by
Apr 10, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.503(b)(1):  The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer:    a)  The employer did not maintain records or certification of fall protection training for employees exposed to fall hazards.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (O) $0

View Sanz Roofing Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 332812072.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.