SNOHOMISH, WA —
OSHA Inspection: BONNEVILLE POWER ADMINISTRATION-SNOHOMISH REGION
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of BONNEVILLE POWER ADMINISTRATION-SNOHOMISH REGION in 914 AVENUE D, SNOHOMISH, WA 98290 (NAICS 221122). OSHA activity number 332821644.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BONNEVILLE POWER ADMINISTRATION-SNOHOMISH REGION
- Site address
- 914 AVENUE D
- City
- SNOHOMISH
- State
- WA
- ZIP
- 98290
- Mailing
- 914 AVENUE D, SNOHOMISH, WA 98290
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 221122
- Employees
- 47
- Ownership type
- D
Citations
5 citations on file for this inspection.
1910.213 C01
- Issued
- Jun 8, 2012
- Abate by
- Jun 29, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: A) At the Bonneville Power Administrations snohomish District office, in a maintenance shop, there was a circular table saw that did not have a hood guard installed to protect operators from the blade.
Recent events (1)
- — Z (S) $0
1910.213 C02
- Issued
- Jun 8, 2012
- Abate by
- Jun 29, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: A) In the maintenance shop at the Bonneville Power Administration Snohomish District Office there was a circular table saw that did not have a spreader installed.
Recent events (1)
- — Z (S) $0
1910.213 C03
- Issued
- Jun 8, 2012
- Abate by
- Jun 29, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: A) In a maintenance shop at the Bonneville Power Administration Snohomish district officer, there was a circular table saw that did not have non kickback fingers installed.
Recent events (1)
- — Z (S) $0
1910.215 B09
- Issued
- Jun 8, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: A) In the maintenance shop at the Bonneville Power Administration Snohomish District Office, there was a bench grinder that had the tongue guards installed improperly, leaving an inch between the edge of the guard, and the surface fo the wheel.
Recent events (1)
- — Z (S) $0
1910.215 D03
- Issued
- Jun 8, 2012
- Abate by
- Jun 29, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(d)(3): The contact surfaces of wheels, blotters or flanges on grinding machines were not flat and free of foreign matter: A) In the maintenance shops, abrasive wheels, with contaminated surfaces were used on two bench grinders exposing employees to the potential hazard caused by bursting abrasive wheels.
Recent events (1)
- — Z (S) $0
More inspections at Bonneville Power Administration-Snohomish Region
View Bonneville Power Administration-Snohomish Region's full OSHA safety record →
More inspections in this industry (NAICS 221122)
More inspections in WA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 332821644.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.