JIM FALLS, WI —
OSHA Inspection: CUSTOM FABRICATING AND REPAIR, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CUSTOM FABRICATING AND REPAIR, INC. in 14193 CTY RD S, JIM FALLS, WI 54748 (NAICS 332999). OSHA activity number 332835768.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CUSTOM FABRICATING AND REPAIR, INC.
- Site address
- 14193 CTY RD S
- City
- JIM FALLS
- State
- WI
- ZIP
- 54748
- Mailing
- 1932 EAST 26TH STREET, MARSHFIELD, WI 54449
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 213
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.146 C04
- Issued
- Aug 28, 2012
- Abate by
- Oct 11, 2012
- Penalty
- Initial $5,000 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.146(c)(4): The employer did not develop and implement a written permit space entry program that complied with 29 CFR 1910.146: a) AMPI facillity in Jim Falls, WI; A contractor employer did not develop and implement a written program for employees working in permit-required confined spaces (PRCS); such as but not limited to, Make Vat #1.
Recent events (2)
- — I (S) $3500
- — Z (S) $5000
1910.146 G01
- Issued
- Aug 28, 2012
- Abate by
- Oct 11, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(g)(1): The employer did not provide training so that all employees whose work was regulated by 29 CFR 1910.146, permit required confined spaces, acquired the understanding, knowledge, and skills necessary for the safe performance of the duties: a) AMPI facillity in Jim Falls, WI; The contractor employer did not provide permit required confined space training to employees that were working in permit required confined spaces (PRCS); such as but not limited to, Make Vat #1.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C04 II B
- Issued
- Aug 28, 2012
- Abate by
- Sep 19, 2012
- Penalty
- Initial $5,000 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. a) AMPI facillity in Jim Falls, WI; The contractor employer had not developed specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy.
Recent events (2)
- — I (S) $3500
- — Z (S) $5000
1910.147 C07 I
- Issued
- Aug 28, 2012
- Abate by
- Sep 19, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees and that knowledge and skills required for safe application, usage and removal of energy controls are acquired by the employees: a) AMPI facillity in Jim Falls, WI; The contractor employer did not provide adequate training about a general energy control program or how to safely apply, use and remove energy controls.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D04 I
- Issued
- Aug 28, 2012
- Abate by
- Sep 19, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: a) AMPI facillity in Jim Falls, WI; The exposed employee did not affix an energy isolation device to the energy source prior to performing servicing and maintenance in Make Vat #1.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Custom Fabricating and Repair, INC.
View Custom Fabricating and Repair, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 332835768.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.