JANESVILLE, WI —
OSHA Inspection: CLINTON ALUMINUM DISTRIBUTION, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CLINTON ALUMINUM DISTRIBUTION, INC. in 400 FREEDOM LANE, JANESVILLE, WI 53546 (NAICS 423510). OSHA activity number 332836386.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CLINTON ALUMINUM DISTRIBUTION, INC.
- Site address
- 400 FREEDOM LANE
- City
- JANESVILLE
- State
- WI
- ZIP
- 53546
- Mailing
- 400 FREEDOM LANE, JANESVILLE, WI 53546
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423510
- Employees
- 16
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C07 I
- Issued
- Jul 3, 2012
- Abate by
- Jul 5, 2012
- Penalty
- Initial $6,300 · Current $4,410 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following: Employees operating and maintaining machinery were not provided with lock out/tag out training.
Recent events (4)
- — F (S) $4410
- — F (S) $4410
- — C (S) $6300
1910.147 D04 I
- Issued
- Jul 3, 2012
- Abate by
- Jul 5, 2012
- Penalty
- Initial $6,300 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees. Maintenance activities conducted on machinery, such as the metal Saw, were performed without lockout devices affixed to each energy isolating device by authorized employees..
Recent events (4)
- — F (S) $0
- — F (S) $0
- — C (S) $6300
1910.151 C
- Issued
- Jul 3, 2012
- Abate by
- Jul 18, 2012
- Penalty
- Initial $3,600 · Current $2,520 Reduced
General-duty citation text
29 CFR 1910.151(c): Where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use. The eye wash station does not flow continuosly for 15 minutes for employees who are exposed to corrosives due to physically pouring water into fork truck batteries.
Recent events (4)
- — F (S) $2520
- — F (S) $2520
- — C (S) $3600
1910.178 P01
- Issued
- Jul 3, 2012
- Abate by
- Jul 18, 2012
- Penalty
- Initial $6,300 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): If at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe, the truck shall be taken out of service until it has been restored to safe operating condition. Maintenance activities on the powered industrial vehicle, such as replacing the seat belt, was not performed prior to employees operating the vehicle.
Recent events (4)
- — F (O) $0
- — F (O) $0
- — C (S) $6300
1910.184 I02
- Issued
- Jul 3, 2012
- Penalty
- Initial $3,600 · Current $2,520 Reduced
General-duty citation text
29 CFR 1910.184(i)(2): Webbing. Synthetic webbing shall be of uniform thickness and width and selvage edges shall not be split from the webbing's width. Damaged slings were not taken out of usage prior to employees operating overhead cranes.
Recent events (4)
- — F (S) $2520
- — F (S) $2520
- — C (S) $3600
1910.1200 H01
- Issued
- Jul 3, 2012
- Abate by
- Jul 5, 2012
- Penalty
- Initial $2,700 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1): Employers did not provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new physical or health hazard the employees have not previously been trained about is introduced into their work area. Information and training may be designed to cover categories of hazards (e.g., flammability, carcinogenicity) or specific chemicals. Chemical-specific information must always be available through labels and material safety data sheets. Employee(s) were not provided with hazardous communication training on chemicals used in their work area.
Recent events (4)
- — F (O) $0
- — F (O) $0
- — C (S) $2700
More inspections at Clinton Aluminum Distribution, INC.
View Clinton Aluminum Distribution, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423510)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 332836386.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.