MERIDEN, CT ·
OSHA Inspection: WERECYCLE! LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of WERECYCLE! LLC in 500 SOUTH BROAD STREET, BLDG F, SOUTH ENTRANCE, DOCK J, MERIDEN, CT 06450 (NAICS 562211). OSHA activity number 332837210.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WERECYCLE! LLC
- Site address
- 500 SOUTH BROAD STREET, BLDG F, SOUTH ENTRANCE, DOCK J
- City
- MERIDEN
- State
- CT
- ZIP
- 06450
- Mailing
- 500 SOUTH BROAD STREET, BLDG F, SOUTH ENTRANCE, DOCK J, MERIDEN, CT 06450
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 562211
- Employees
- 60
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.22 A01
- Issued
- May 17, 2012
- Abate by
- May 22, 2012
- Penalty
- Initial $3,600 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition. WAREHOUSE: 1. The Battery Sorting Area was blocked with two (2) hand carts having boxes at a 60 degree angle and where a powered industrial truck (PIT) was carrying a load. ABATED DURING THE INSPECTION. 2. The eastern side of the baler was blocked with numerous metal containers and plastic on the ground. 3. Under the rotating conveyor belt was blocked with two (2) opened top 55 gallon drums for the cardboard boxes. ABATED DURING THE INSPECTION.
Recent events (3)
- · C (S) $3600
- · F (S) $1500
- · Z (S) $3600
1910.22 A02
- Issued
- May 17, 2012
- Abate by
- Jun 16, 2012
- Penalty
- Initial $3,600 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.22(a)(2): Floor(s) of workroom(s) were not maintained in a clean and, so far as possible, a dry condition: WAREHOUSE: The floor, between the hydraulic motor for the machine door and the baler was wet due to leaking hydraulic oil and creating slip and fall hazards for the employees.
Recent events (3)
- · C (S) $3600
- · F (S) $1500
- · Z (S) $3600
1910.37 A03
- Issued
- May 17, 2012
- Abate by
- Jun 16, 2012
- Penalty
- Initial $3,600 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.37(a)(3): Exit route(s) were not free and unobstructed. Material(s) or equipment were placed, either permanetly or temporarily: WAREHOUSE: A box of poly carbon and a fan were placed in the exit route on the eastern side of the warehouse.
Recent events (3)
- · C (S) $3600
- · F (S) $1500
- · Z (S) $3600
1910.132 F01
- Issued
- May 17, 2012
- Abate by
- Jun 16, 2012
- Penalty
- Initial $3,600 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.132(f)(1): The employer did not provide training to each employee who is required by this section to use personal protective equipment: WAREHOUSE: The employer had not trained all the employees on the Workplace hazard assessment for personal protective equipment (PPE).
Recent events (3)
- · C (S) $3600
- · F (S) $1500
- · Z (S) $3600
1910.147 C04 I
- Issued
- May 17, 2012
- Abate by
- Aug 16, 2012
- Penalty
- Initial $4,500 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: WAREHOUSE: The employer did not establish and implement site specific step-by-step written energy control procedures in the machine specfic for the employees during servicing and maintenance of equipment, such as (but not limited to) the baler.
Recent events (3)
- · C (S) $4500
- · F (S) $3500
- · Z (S) $4500
1910.147 C07 I
- Issued
- May 17, 2012
- Abate by
- Aug 16, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: WAREHOUSE: The employees, as affected and other types were not provided with training and information in the controlling of potentially hazardous and unexpected releases of energy sources (lockout/tagout) during servicing and maintenance of equipment, such as (but not limited to) the baler.
Recent events (3)
- · C (S) $0
- · F (S) $0
- · Z (S) $0
1910.212 A01
- Issued
- May 17, 2012
- Abate by
- Jun 16, 2012
- Penalty
- Initial $4,500 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by rotating part and pinch point: WAREHOUSE: The following parts on the International Baler Corporation baler were inadequately guarded as followed: 1. The interlock switch on the pinch point of the conveyor/baler machine door was broken. ABATED DURING THE INSPECTION. 2. The lower guards for the rotating conveyor belt were bent and held together with a piece of metal wire.
Recent events (3)
- · C (S) $4500
- · F (S) $2500
- · Z (S) $4500
More inspections in this industry (NAICS 562211)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 332837210.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.