OSHA Inspection: BRUNSWICK BOAT WORKS LLC

Issued

Apr 11, 2012

Abate by

Mar 29, 2012

Penalty

Initial $1,530 · Current $765 Reduced

General-duty citation text

29 CFR 1915.134(b):     Floor and bench mounted grinders shall be provided with work rests which are rigidly supported and readily adjustable. Such work rests shall be kept a distance not to exceed 1/8 inch from the surface of the wheel.    Boat Repair work bench area -  Distance between tool rest and Abrasive wheel on the Sears Craftsman six inch bench grinder, Model # 152, was more than 1/8 of an inch.

Issued

Apr 11, 2012

Abate by

Apr 18, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.37(b)(2):     Each exit was not clearly visible and marked by a sign reading "Exit."    At the Facility, East side of building - An exit door was not marked with a sign reading "Exit."

Issued

Apr 11, 2012

Abate by

Apr 18, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.37(b)(5):     Each doorway or passage along an exit access that could be mistaken for an exit was not marked "Not an Exit" or similar designation, or be identified by a sign indicating its actual use (e.g., closet).    At the Facility -     Doors were not marked "Not an Exit" in the following locations:   a.) Office door  b.) Electrical repair room

Issued

Apr 11, 2012

Abate by

Apr 18, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.242(b):     Compressed air used for cleaning. Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment.    Center columun work area - Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i dead ended. The air pressure was measured at 130 p.s.i.