PORTLAND, ME —
OSHA Inspection: C. G. BUILDERS
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of C. G. BUILDERS in 288 MELBOURNE STREET, PORTLAND, ME 04101 (NAICS 238170). OSHA activity number 333311637.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C. G. BUILDERS
- Site address
- 288 MELBOURNE STREET
- City
- PORTLAND
- State
- ME
- ZIP
- 04101
- Mailing
- 36 GUINEA ROAD, PORTLAND, ME 04101
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 4
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.451 G01 I
- Issued
- Apr 18, 2012
- Penalty
- Initial $4,200 · Current $4,200
General-duty citation text
29 CFR 1926.451(g)(1)(i): Each employee on a boatswains' chair, catenary scaffold, float scaffold, needle beam scaffold, or ladder jack scaffold was not protected by a personal fall arrest system: At the Jobsite - The employees were working on the ladder jack scaffold at a height of 20 feet without a personal fall arrest system.
Recent events (1)
- — Z (S) $4200
1926.304 F
- Issued
- Apr 18, 2012
- Penalty
- Initial $3,000 · Current $3,000
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed ripsaws were not guarded by an automatically adjusting hood which completely encloses that portion of the saw above the table and above the material being cut: At the Jobsite - The 8 inch Bosch table saw was not provided with a hood guard.
Recent events (1)
- — Z (S) $3000
1926.304 F
- Issued
- Apr 18, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws were not equipped with a spreader to prevent material from squeezing the saw or being thrown back on the operator: At the Jobsite - The 8 inch Bosch table saw was not provided with a spreader.
Recent events (1)
- — Z (S) $0
1926.304 F
- Issued
- Apr 18, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(f): Sectioin 4.1.2(c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws did not have non-kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: At the Jobsite - The 8 inch Bosch table saw was not provided with non-kickback fingers.
Recent events (1)
- — Z (S) $0
1926.304 F
- Issued
- Apr 18, 2012
- Penalty
- Initial $3,000 · Current $3,000
General-duty citation text
29 CFR 1926.304(f): Section 5.1.3.3 American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Electrically driven equipment was not controlled with magnetic switches or other devices that would prevent automatic restarting of the machine after a power failure: At the Jobsite - The electrically driven 8 inch Bosch table saw was not provided with anti-restart protection.
Recent events (1)
- — Z (S) $3000
1926.1052 C01
- Issued
- Apr 18, 2012
- Penalty
- Initial $2,400 · Current $2,400
General-duty citation text
29 CFR 1926.1052(c)(1): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with at least one handrail and one stairrail system along each unprotected side or edge: At the Jobsite - The stairway was not provided with hand rail protection.
Recent events (1)
- — Z (S) $2400
1926.100 A
- Issued
- Apr 18, 2012
- Penalty
- Initial $1,800 · Current $1,800
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: At the Jobsite - An employee exposied to falling objects was not provided with head protection.
Recent events (1)
- — Z (S) $1800
More inspections at C. G. Builders
View C. G. Builders's full OSHA safety record →
More inspections in this industry (NAICS 238170)
More inspections in ME
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 333311637.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.