Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: GARY MAY DRILLING INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of GARY MAY DRILLING INC. in PIONEER AND CR 70 GPS N36.22.25 - W 97.21.04, PERRY, OK 73077 (NAICS 213111). OSHA activity number 333874220.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Gary MAY Drilling INC. for free Get an email when a new federal OSHA severe-injury report for Gary MAY Drilling INC. is published. One employer, no account, unsubscribe in one click.
Site address
PIONEER AND CR 70 GPS N36.22.25 - W 97.21.04
City
PERRY
State
OK
ZIP
73077
Mailing
PO BOX 135, PERRY, OK 73077
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
213111
Employees
5
Ownership type
Private (A)

5 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 5, 2012
Abate by
Sep 20, 2012
Penalty
Initial $2,000 · Current $1,200 Reduced
OSH ACT of 1970 Section (5)(a)(1):     The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees:    a) Gary May Drilling Rig: On April 16, 2012 and at times prior there to, employee(s) were exposed falls by not being provided a safe means of alternate escape from the derrick board. The auxiliary emergency line was not installed.
Recent events (2)
  • · I (S) $1200
  • · Z (S) $2000

1910.23 C01

Serious Gravity 5 1 instance 18 exposed
Issued
Sep 5, 2012
Abate by
Sep 20, 2012
Penalty
Initial $2,000 · Current $1,200 Reduced
29 CFR 1910.23(c)(1):     Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:  Note:  Toeboards are only required when persons can pass, there is moving equipment or there is equipment with which falling materials could create a hazard.    a) Gary May Drilling Rig: On April 16, 2012 and at times prior there to, the employer failed to ensure that there was a standard railing on the platform between the dog house and stairs leading to the dog house.
Recent events (2)
  • · I (S) $1200
  • · Z (S) $2000

1910.157 C01

Serious Gravity 5 1 instance 18 exposed
Issued
Sep 5, 2012
Abate by
Sep 20, 2012
Penalty
Initial $2,000 · Current $1,200 Reduced
29 CFR 1910.157(c)(1):     Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:    a) Gary May Drilling Rig: On April 16, 2012 and at times prior there to, the employer failed to ensure that there were fire extinguishers located and identifiable on the drilling rig.
Recent events (2)
  • · I (S) $1200
  • · Z (S) $2000

1910.305 G02 II

Serious Gravity 5 1 instance 4 exposed
Issued
Sep 5, 2012
Abate by
Sep 20, 2012
Penalty
Initial $2,000 · Current $1,200 Reduced
29 CFR 1910.305(g)(2)(ii):     Flexible cords were not used only in continuous lengths without splice or tap:                                                         a) Gary May Drilling Rig: On April 16, 2012 and at times prior there to, the employer failed to ensure that flexible cords did not have splices or taps under the mud house.
Recent events (2)
  • · I (S) $1200
  • · Z (S) $2000

1910.305 G02 III

Serious Gravity 5 1 instance 4 exposed
Issued
Sep 5, 2012
Abate by
Sep 20, 2012
Penalty
Initial $2,000 · Current $1,200 Reduced
29 CFR 1910.305(g)(2)(iii):     Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws:    a) Gary May Drilling Rig: On April 16, 2012 and at times prior there to, the employer failed to ensure that flexible cords going into an electrical panel were provided with adequate strain relief.
Recent events (2)
  • · I (S) $1200
  • · Z (S) $2000

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 333874220.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.