FOREST HILLS, NY ·
OSHA Inspection: AXA CUSTOM DESIGN INC.
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of AXA CUSTOM DESIGN INC. in 112-06 68 ROAD, FOREST HILLS, NY 11375 (NAICS 236115). OSHA activity number 334001021.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AXA CUSTOM DESIGN INC.
- Site address
- 112-06 68 ROAD
- City
- FOREST HILLS
- State
- NY
- ZIP
- 11375
- Mailing
- 1029 MCDONALD AVE, BROOKLYN, NY 11230
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236115
- Employees
- 4
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1926.405 G02 III
- Issued
- Sep 24, 2012
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.405(g)(2)(iii): The repair splice in a hard service flexible cord No. 12 or larger did not retain the insulation, outer sheath properties, and usage characteristics of the cord which was being used: a) On or about April 4, 2012-Job site at 112-06 68 Road Flushing, NY 11375 Employee exposed to un-insulated copper wire on a flexible cord set. WRITTEN ABATEMENT DOCUMENTATION IS NOT REQUIRED.
Recent events (1)
- · Z (S) $2000
1926.501 B04 I
- Issued
- Sep 24, 2012
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.501(b)(4)(i): Each employee on walking/working surfaces was not protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around holes: a) On or about April 4, 2012-Job site at 112-06 68 Road Flushing, NY 11375 Employees were exposed to a fall of 9-feet to the first floor through an unguarded floor hole. WRITTEN ABATEMENT CERTIFICATION IS NOT REQUIRED.
Recent events (1)
- · Z (S) $2000
1926.501 B14
- Issued
- Sep 24, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.501(b)(14): Each employee working on, at, above, or near wall openings (including those with chutes attached), where the outside bottom edge of the wall opening was 6 feet (1.8 m) or more above lower levels and the inside bottom edge of the wall opening is less than 39 inches (1.0 M) above the walking/working surface, is not protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system. a) On or about April 4, 2012-Job site at 112-06 68 Road Flushing, NY 11375 Employees exposed to fall of 9-feet from unguarded window. WRITTEN ABATEMENT CERTIFICATION IS NOT REQUIRED.
Recent events (1)
- · Z (S) $0
1926.503 A01
- Issued
- Sep 24, 2012
- Abate by
- Nov 6, 2012
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: a) On or about April 4, 2012-Job site at 112-06 68 Road Flushing, NY 11375 Employee exposed to falls up to 9-feet without fall protection training to identify hazards. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (1)
- · Z (S) $2000
More inspections in this industry (NAICS 236115)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 334001021.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.