Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CONN'S APPLIANCE

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of CONN'S APPLIANCE in 7730 IH35 N, SAN ANTONIO, TX 78218 (NAICS 453998). OSHA activity number 334019239.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Conn'S Appliance — free Get an email when a new federal OSHA severe-injury report for Conn'S Appliance is published. One employer, no account, unsubscribe in one click.
Establishment
CONN'S APPLIANCE
Site address
7730 IH35 N
City
SAN ANTONIO
State
TX
ZIP
78218
Mailing
7730 IH35 N, SAN ANTONIO, TX 78218
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
453998
Employees
30
Ownership type
A

5 citations on file for this inspection.

1910.132 D01

Serious Gravity 10 3 exposed
Issued
Jun 28, 2012
Abate by
Jul 20, 2012
Penalty
Initial $7,000 · Current $4,200 Reduced
29 CFR 1910.132(d)(1):  The employer did not assess the workplace to determine if hazards were present, or were likely to be present, which necessitated the use of personal protective equipment:    a) On or about April 20, 2012, and at times prior thereto, at this facility where demolition and construction activities were being performed; a hazard assessment for personal protective equipment (PPE) selection was not conducted, for such items as but limited to hardhats and eyeglasses, exposing employees to struck-by hazards.
Recent events (2)
  • — I (S) $4200
  • — Z (S) $7000

1910.135 A01

Serious Gravity 10 3 exposed
Issued
Jun 28, 2012
Abate by
Jul 20, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.135(a)(1): The employer did not ensure that each affected employee wore a protective helmet when working in areas where there is a potential for injury to the head from falling objects:    a) On or about April 20, 2012, and at times prior thereto, employees were allowed to work within in area where over struck-by hazards were present without the use of hard hat protection.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.303 G02 I

Deleted Serious Gravity 5 3 exposed
Issued
Jun 28, 2012
Abate by
Jul 20, 2012
Penalty
Initial $5,000 · Current $0 Reduced
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by this standard, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the following means:    a) On or about April 20, 2012, and times prior thereto, at this job site, employees were allowed to work in close proximity to live electrical breaker cabinet boxes with exposed live electrical parts. This condition exposed employees to an electrical hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5000

1910.303 B01

Deleted Serious Gravity 5 3 exposed
Issued
Jun 28, 2012
Abate by
Jul 20, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.303(b)(1):  Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees:    a) On or about April 20, 2012, and times prior thereto, at this job site, employees were allowed to work in close proximity to live electrical breaker cabinet boxes with live exposed electrical parts. This condition exposed employees to an electrical hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.303 F02

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
Jun 28, 2012
Abate by
Jul 20, 2012
Penalty
Initial $4,000 · Current $0 Reduced
29 CFR 1910.303(f):  Each service, feeder and branch circuit, at its disconnecting means or over current device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:    On or about April 20 2012, and times prior thereto, at this facility, a live electrical breaker cabinet box was not visibly marked and identified exposing employees to an electrical hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4000

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334019239.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.