PLEASANT DALE, NE —
OSHA Inspection: T & S SERVICES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of T & S SERVICES in 105 MAIN STREET, PLEASANT DALE, NE 68423 (NAICS 332999). OSHA activity number 334037421.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- T & S SERVICES
- Site address
- 105 MAIN STREET
- City
- PLEASANT DALE
- State
- NE
- ZIP
- 68423
- Mailing
- 105 MAIN STREET, PLEASANT DALE, NE 68423
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 11
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.215 A04
- Issued
- Jul 12, 2012
- Abate by
- Jul 22, 2012
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion. Job site located at 105 Main Street, Pleasant Dale, NE 68423-Employees were allowed to use a pedestal grinder where the work rests on both side of the grinder was more than 1/8 " from the work rest. The lest side was 1/3 of an inch and the right was 1/4 of an inch from the work rest.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1910.303 B01
- Issued
- Jul 12, 2012
- Abate by
- Jul 22, 2012
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.303(b)(1): Examination. Electric equipment shall be free from recognized hazards that are likely to cause death or serious physical harm to employees. Safety of equipment shall be determined using the following considerations: 29 CFR 1910.305(b)(3)(ii): Boxes shall be closed by suitable covers securely fastened in place. Note to paragraph (b)(3)(ii) of this section: Underground box covers that weigh over 45.4 kg (100 lbs) meet this requirement. Job site located at 105 Main Street, Pleasant Dale, NE 68423-Employees were allowed to plug into electrical outlet boxes that were not closed by suitable covers securely fastened in place.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.303 B02
- Issued
- Jul 12, 2012
- Abate by
- Jul 22, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Installation and use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling. 29 CFR 1910.303(b)(1): Examination. Electric equipment shall be free from recognized hazards that are likely to cause death or serious physical harm to employees. Safety of equipment shall be determined using the following considerations: Job site located at 105 Main Street, Pleasant Dale, NE 68423-The employer did not conduct inspections of the electrical equipment at the facility to ensure that the electrical equipment is free from recognized hazards that are likely to cause death or serious physical harm to employees.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at T & S Services
View T & S Services's full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334037421.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.