OSHA Inspection: SCARANO BOAT BUILDING, INC.

Issued

2012-09-07 00:00:00

Abate by

2012-09-14 00:00:00

Penalty

Initial $1360.00 · Current $1020.00 Reduced

General-duty citation text

1915.93(b)(2): The employer did not ensure that each employee used a safety belt, securely and tightly fastened, at all times while operating or riding in a motor vehicle.    A) Worksite - On or about May 3, 2012, employees did not wear the seat belt while operating the TCM Model FG25N5T forklift.

Issued

2012-09-07 00:00:00

Abate by

2012-09-28 00:00:00

Penalty

Initial $1360.00 · Current $1020.00 Reduced

General-duty citation text

29 CFR 1915.502(a):  A written fire safety plan has not been developed and implemented that covers all of the actions necessary to ensure employees' safety in the event of a fire:    A) Worksite - On or about May 3, 2012, the employer did not develop and implement a written fire safety plan to address the hazards of the flammable materials used on-site (e.g. paint, acetylene, LPG).

Issued

2012-09-07 00:00:00

Abate by

2012-09-28 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.22(b)(1): Aisles and passageways were not kept clear and in good repair, with no obstruction across or in aisles that could create a hazard:      A) Loading dock - On or about May 3, 2012, the concrete loading dock was in poor condition as the concrete was crumbling and there was visible rebar.

Issued

2012-09-07 00:00:00

Abate by

2012-09-28 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.134(f)(2):  Employee(s) using a tight-fitting facepiece respirator were not annually fit tested:    A) Worksite - On or about May 3, 2012, employees who used half face respirators were not provided with annual fit tests.

Issued

2012-09-07 00:00:00

Abate by

2012-09-14 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.303(g)(1)(i)(A):  For electric equipment operating at 600 volts, nominal, or less to ground, and likely to require examination, adjustment, servicing, or maintenance while energized, the depth of the working space in the direction of access to live parts (as measured from the live parts where they were exposed or from the enclosure front or opening whwere they were enclosed) was less than indicated in Table S-1 of Subpart S of Part 1910:    A) West Shop - On or about May 3, 2012, two sawhorses were stored within three feet of the front of the 480 V Electrical Panel P.