CAMPBELLTON, TX —
OSHA Inspection: PRICE DRILLING COMPANY INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PRICE DRILLING COMPANY INC. in 2.9 MILES NE OF CAMBELLTON JUNCTION I-37 AND FM-1099 PRICE DRILLING #2, CAMPBELLTON, TX 78008 (NAICS 213111). OSHA activity number 334109238.
Where did this inspection happen?
- Establishment
- PRICE DRILLING COMPANY INC.
- Site address
- 2.9 MILES NE OF CAMBELLTON JUNCTION I-37 AND FM-1099 PRICE DRILLING #2
- City
- CAMPBELLTON
- State
- TX
- ZIP
- 78008
- Mailing
- 1032 EAST MAIN, BENAVIDES, TX 78341
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 213111
- Employees
- 60
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.22 A01
- Issued
- May 11, 2012
- Abate by
- Jun 4, 2012
- Penalty
- Initial $2,100 · Current $2,100
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition: a) Engine room, On or about 5/2/12 and at times prior thereto, in case of an emergency, employee(s) were exposed to trip hazards from items such as but not limited to: firextinguishers, light fixtures and batteries scattered on the floor.
Recent events (2)
- — I (S) $2100
- — Z (S) $2100
1910.303 G01 I
- Issued
- May 11, 2012
- Abate by
- Jun 4, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(i): Work space was less than 30 inches wide in front of electric equipment operating at 600 volts, nominal, or less: a) Engine room, On or about 5/2/12 and at times prior thereto employee(s) were exposed to, in case of an emergency, not having access to an electrical panel due to items such as but not limited to: fire extinguisher, light fixtures and batteries, scattered on the floor.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.22 C
- Issued
- May 11, 2012
- Abate by
- Jun 4, 2012
- Penalty
- Initial $2,100 · Current $2,100
General-duty citation text
29 CFR 1910.22(c): Covers and/or guardrails were not provided to protect personnel from the hazards of open pits, tanks, vats, ditches, etc: a) Mud Pits, On or about 5/1/12 and at times prior thereto employee(s) were exposed to a fall of approximately 5 ft. to the pit below when washing their hands. b) Mud Pits, On or about 5/1/12 and at times prior thereto employee(s) were exposed to a fall when pouring milgel into a hopper to mix with the mud.
Recent events (2)
- — I (S) $2100
- — Z (S) $2100
1910.23 D01
- Issued
- May 11, 2012
- Abate by
- Jun 4, 2012
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1910.23(d)(1): Every flight of stairs having four or more risers was not equipped with standard stair railings or standard handrails as specified in paragraphs (d)(1)(i) through (v) of this section, the width of the stair to be measured clear of all obstructions except handrails: a) Stairway north end of rig platform, On or about 5/2/12 and at times prior thereto employee(s) were exposed to a trip hazard when using the stairs to access the oil platform. b) Stairway northwest end of engine room, On or about 5/2/12 and at times prior thereto employee(s) were exposed to a trip hazard when using the stairs to access the engine room.
Recent events (2)
- — I (S) $2800
- — Z (S) $2800
1910.23 E01
- Issued
- May 11, 2012
- Abate by
- Jun 4, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.23(e)(1): Standard railing(s) did not consist of top rail, intermediate rail and/or posts and/or did not have a vertical height of 42 inches (106.7 cm) nominal from upper surface of top rail to floor, platform runway, or ramp level: a) Stairway south end of platform, On or about 5/2/12 and at times prior thereto employee(s) were exposed to a fall when ascending and descending a stairway to retrieve pipe casing.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.132 A
- Issued
- May 11, 2012
- Abate by
- Jun 4, 2012
- Penalty
- Initial $3,500 · Current $0 Reduced
General-duty citation text
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered: a) Rig Platform, On or about 5/2/12 and at times prior thereto employee(s) were exposed to potential flash fires when the employer failed to provide and ensure the use of flame-retardant treated clothing (FRC) when drilling an injection well.
Recent events (2)
- — I (S) $0
- — Z (S) $3500
1910.151 B
- Issued
- May 11, 2012
- Abate by
- Jun 30, 2012
- Penalty
- Initial $7,000 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.151(b): There was neither an infirmary, clinic, or hospital used for the treatment of all injured employees in near proximity to the workplace nor a person or persons adequately trained to render first aid: a) On or about 5/2/12 and at times prior there to, employee(s) were exposed to, in case of an emergency, not receiving immediate first aid in a timely manner. THE PRICE DRILLING COMPANY INC., WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD, ITS EQUIVALENT, OR ESSENTIALLY SIMILAR STANDARD, 29 CFR 1910.151(b), WHICH WAS CONTAINED IN OSHA INSPECTION 313240111, CITATION NUMBER 1, ITEM NUMBER 14, AND WAS AFFIRMED AS A FINAL ORDER ON: December 15, 2009, WITH RESPECT TO A WORKPLACE LOCATED AT THOMASON #1 WELL LTTLE VRANA #1-API 42409329080000.
Recent events (2)
- — I (R) $5000
- — Z (R) $7000
1910.151 C
- Issued
- May 11, 2012
- Abate by
- Jun 4, 2012
- Penalty
- Initial $5,600 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) On or about 5/2/12 and at times prior thereto employee(s) were exposed to MillGel a viscosifer in powder form, that can cause corneal abrasions per the M.S.D.S., while pouring the powder into a hopper. THE PRICE DRILLING COMPANY INC., WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD, ITS EQUIVALENT, OR ESSENTIALLY SIMILAR STANDARD, 29 CFR 1910.151(c), WHICH WAS CONTAINED IN OSHA INSPECTION 313240111, CITATION NUMBER 1, ITEM NUMBER 15, AND WAS AFFIRMED AS A FINAL ORDER ON: December 15, 2009, WITH RESPECT TO A WORKPLACE LOCATED AT THOMASON #1 WELL LTTLE VRANA #1-API 42409329080000.
Recent events (2)
- — I (R) $1000
- — Z (R) $5600
More inspections in this industry (NAICS 213111)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334109238.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.