KOSCIUSKO, MS —
OSHA Inspection: FARGO ASSEMBLY OF MS
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of FARGO ASSEMBLY OF MS in 2436 ATTALA ROAD 2202, KOSCIUSKO, MS 39090 (NAICS 334419). OSHA activity number 334122421.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FARGO ASSEMBLY OF MS
- Site address
- 2436 ATTALA ROAD 2202
- City
- KOSCIUSKO
- State
- MS
- ZIP
- 39090
- Mailing
- P.O. BOX 1285, KOSCIUSKO, MS 39090
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 334419
- Employees
- 113
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.212 A05
- Issued
- Jul 6, 2012
- Abate by
- Jul 11, 2012
- Penalty
- Initial $2,295 · Current $1,377 Reduced
General-duty citation text
29 CFR 1910.212(a)(5): Fan blade guard(s) were not provided where the periphery of the blades was less than seven feet from the floor or working level: (a) Warehouse - On or about April 26, 2012 employees were exposed to rotating fan blades without guard. (b) 9WO9 - On or about April 26, 2012 employees were exposed to rotating fan blades without guard.
Recent events (2)
- — I (S) $1377
- — Z (S) $2295
1910.303 B02
- Issued
- Jul 6, 2012
- Abate by
- Jul 11, 2012
- Penalty
- Initial $3,060 · Current $1,836 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) Assembly area - Receptacles were in use that were not mounted or secured.
Recent events (2)
- — I (S) $1836
- — Z (S) $3060
1910.303 G02 I
- Issued
- Jul 6, 2012
- Abate by
- Jul 11, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets of other forms of approved enclosures, or other means listed under this provision: (a) West wall of back building panel-F - On or about April 26, 2012 the electrical panel had missing breakers or blanks.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 A02 I
- Issued
- Jul 6, 2012
- Abate by
- Jul 13, 2012
- Penalty
- Initial $2,295 · Current $1,377 Reduced
General-duty citation text
29 CFR 1910.305(a)(2)(i): Temporary electrical power and lighting installation(s) 600 volts, nominal, or less were used in prohibited manners: Note: Temporary electrical power and lighting installation(s) may only be used as specified by 1910.305(a)(2)(i)(A) through 1910.305(a)(2)(i)(C). (a) Warehouse area - On or about March 26, 2012 extension cords were plugged into another extension cord for power at the computer desk. (b) Soldering area - On or about May 02, 2012 extension cords were plugged into other extension cords for power in the area.
Recent events (2)
- — I (S) $1377
- — Z (S) $2295
1910.305 G02 III
- Issued
- Jul 6, 2012
- Abate by
- Jul 13, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: (a) Breader machine - On or about April 26, 2012 employees were exposed to damaged/worn strain relief on top and bottom of electrical receptacle. (b) Cutting Department - On or about April 26, 2012 employees were exposed to damaged/worn strain relief on electrial cord. (c) Maintenance - On or about April 26, 2012 employees were exposed to damaged/worn strain relief on surface grinder. (d) Solder area - On or about April 26, 2012 employees were exposed to damaged/worn strain relief on electrical cords.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 B02 I
- Issued
- Jul 6, 2012
- Abate by
- Jul 13, 2012
- Penalty
- Initial $3,060 · Current $1,836 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: (a) Braider machine - On or about April 26, 2012 the facility had junction boxes with missing knockouts. (b) Heat shrinking machine - On or about April 26, 2012 junction box with missing knowckouts. (c) Maintenance - On or about April 26, 2012 electrical panel on the surface grinder had opening.
Recent events (2)
- — I (S) $1836
- — Z (S) $3060
1910.215 B09
- Issued
- Jul 6, 2012
- Abate by
- Jul 13, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): 29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch. (a) Maintenance area - On or about April 26, 2012 employees were using a 6" Ace Dual bench grinder with the tongue guard adjusted to one (1) inch from the wheel.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Fargo Assembly of MS
View Fargo Assembly of MS's full OSHA safety record →
More inspections in this industry (NAICS 334419)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334122421.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.